1) brazing flux
反应钎剂
1.
The optimum parameters of brazing of 2090Ce alloy in furnace brazing and vacuum brazing conditions have been provided through the researches of brazing fluxes and brazing filler metals(HL401 and Al-Ge-Si).
通过以新研制的反应钎剂和HL401钎料、Al-Ge-Si钎料对2090Ce铝锂合金进行了钎焊试验研究，提供了优化的炉中钎焊和真空钎焊工艺规范；并探讨了钎焊间隙对钎缝组织性能的影响；建立了2090Ce铝锂合金钎缝组织形态成长模型，并建立了母材溶解厚度控制模型，对钎料的选择、钎焊工艺参数的优化选择及接头钎焊间隙的确定提供了一种新的方法。
2) reactive braze coating
反应钎涂
1.
Chromium carbide/Fe-based self-fluxing alloy composite coatings produced by vacuum reactive braze coating;
碳化铬／铁基自熔合金复合涂层真空反应钎涂
2.
In this paper,white carbide/Fe based composite coatings with bright and smooth surface bonded with a metallurgical bond to a mild steel substrate were synthesized by reactive braze coating(RBC) of the mixed carbon,iron,silicon,ferrochromium,ferrotitanium and nickel powder in vacuum braze furnace.
利用工业原料纯铁粉、硅粉、钛铁粉、硼铁粉、铬铁粉、胶体石墨以及镍粉,真空条件下通过反应钎涂于1200℃在低碳钢基体上制备了白色、表面光滑、平整且与基体为冶金结合的碳化物/铁基合金复合涂层。
3) reaction brazing
反应钎焊
1.
Resolve of fragile and defect problem for a new contact reaction brazing aluminum to stainless steel;
为满足不锈钢电加热餐具生产的需要,提出采用接触反应钎焊的方法实现复合电热餐具的铝热管与铝板、铝板与不锈钢板结构的高致密连接。
4) contact reactive brazing
接触反应钎焊
1.
Experimental study on LD30 aluminum contact reactive brazing;
LD30铝合金接触反应钎焊的试验研究
2.
A new technology for contact reactive brazing of aluminum to stainless steel in composite electro-thermal cooker;
复合电热餐具铝/不锈钢接触反应钎焊新技术
3.
Test of 6063 Al alloy contact reactive brazing has been conducted in the case of special brazing parameters,using Cu foil and Cu foil-Mg power-Cu foil as reaction layer material,the microstructure and grain boundary penetration phenomena were analyzed and discussed primarily.
采用Cu箔及Cu箔-Mg粉-Cu箔作为反应层材料,在特定的工艺参数条件下,对6063铝合金进行了真空接触反应钎焊试验,初步分析探讨了钎缝微观组织结构和晶界渗透现象。
5) reactive composite-brazing
反应-复合钎焊
6) Flux
[英][flʌks] [美][flʌks]
钎剂
1.
Trend and Current Situation of Flux for Aluminium and Its Alloys;
铝及铝合金用钎剂的发展现状和趋势
2.
Mechanism of brazing flux reacting with oxide film of LY12 aluminum alloy;
LY12铝合金氧化膜与钎剂的反应机制
3.
Study on the Reaction Flux for Al-Li Alloy Brazing;
铝锂合金钎焊反应钎剂的研究
补充资料：打钎
1.采矿﹑开隧道等爆破工程中，以锤击钎子，在岩石上或土中凿孔。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条