1.
Contact reactive brazing between Al alloy/Cu/stainless steel and analysis on grain boundary penetration behaviors
铝合金/铜/不锈钢接触反应钎焊及晶界渗透行为分析
2.
Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;
Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究
3.
Interfacial reaction of active brazing between Al_2O_3 ceramic and metal Ni
Al_2O_3陶瓷与金属Ni活性钎焊界面反应
4.
Research on the Liquid Structure of Lead-free Solders and the Interfacial Reaction during Soldering and Their Correlation;
无铅钎料的液态结构与钎焊界面反应及其相关性研究
5.
Interfacial reaction between solder alloys and metallization during laser solder bonding process for optical fiber alignment
光纤定位激光钎焊键合过程中钎料与镀层的界面反应
6.
The Research of Brazing Application for Measuring Installation of Fast Neutron Experimentation Reactor;
快中子实验反应堆测控装置钎焊技术研究
7.
Interfacial Reactions and Alignment for Fiber Bonding by Laser Soldering;
光纤激光钎焊键合过程中界面反应及对准研究
8.
The Study on Reactive Wettability of SnAgCu Solder Alloy on Au/NiFe/Cu PAD
SnAgCu钎料合金在Au/NiFe/Cu焊盘上的反应润湿研究
9.
Reaction mechanism and microstructure of interface in soldered joint of zinc-based alloy
锌基合金钎焊界面区的反应机制及组织结构
10.
Transient Contact Liquid-Solid Reaction of Solder Droplet/Pad and Interfacial Microstructure Evolution;
钎料熔滴/焊盘瞬间接触液固反应及界面组织演变
11.
Development on High-frequency Induction Brazing Solder of Al/45 Steel
Al/45钢高频感应钎焊焊料的研制
12.
Development of Brazing Grease for Stainless Steel-Aluminum in High Frequency Induction Brazing;
不锈钢—铝高频感应钎焊膏状钎料的研制
13.
Temperature Field Analysis of High-frequency Induction Brazing and Experimental Verification;
高频感应钎焊温度场分析与试验研究
14.
Residual Stress Field Analysis of Monolayer Brazed Diamond Tools;
单层钎焊金刚石工具的残余应力分析
15.
Study on the Hi-frequency Induction Brazing of Diamond Tools
金刚石刀具高频感应钎焊工艺的研究
16.
Study on the Post-weld Heat Preservation Technology of Hi-frequency Induction Brazing for PCD Cutting Tools;
PCD刀具高频感应钎焊焊后保温工艺研究
17.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
18.
This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.
介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。