1)  Poly(sodium acrylate)
丙烯酸钠聚合物
2)  high relative molecular poly(sodium acrylate)
高分子量丙烯酸钠聚合物
1.
This article dealed with the influencing factors and the optimum treating condition of the starch wastewater with high relative molecular poly(sodium acrylate).
研究了高分子量丙烯酸钠聚合物絮凝剂用量、助凝剂用量、体系pH值以及搅拌速率等因素对淀粉废水絮凝效果的影响。
3)  Propene
丙烯
1.
Nanostructured CoMoO_4 Supported on Mesoporous SBA-15 for Catalytic Oxidative Dehydrogenation of Propane to Propene;
SBA-15负载纳米CoMoO_4催化剂催化丙烷氧化脱氢制丙烯(英文)
2.
Establishment of Analysis Method on Sulfur Forms in Propene;
丙烯中形态硫分析方法的建立
3.
Deactivation of catalyst TS-1 in propene epoxidation;
丙烯环氧化反应中TS-1催化剂失活研究
4)  propylene
丙烯
1.
Study on Conversion of Butylenes to Propylene over SAPO-34 Molecular Sieve;
SAPO-34分子筛催化丁烯转化制丙烯的研究
2.
Application of assistant LTB-1 for enhancing yield of propylene in FCCU;
LTB-1型增产丙烯助剂在催化裂化装置上的应用
3.
Industrial application of catalyst LIP-200 for increasing yield of propylene;
增产丙烯LIP-200催化剂的工业应用
5)  propane
丙烯
1.
A divided wall column was used to separate propylene and propane.
提出了采用隔离壁塔分离丙烯-丙烷的新工艺。
2.
The effect of Cr addition to Pt-Sn/γ-Al_2O_3 catalyst on the activity,selectivity and deactivation in the propane dehydrogenation was studied.
结果表明,添加少量Cr可显著改善Pt-Sn/γ-A l2O3催化剂的脱氢稳定性,可提高丙烯选择性,降低催化剂表面积炭量。
3.
Due to the different catalytic oxidation property between propylene and propane,the impact of nature of hydrocarbon to light-off performance is investigated in laboratory simulated evaluation system.
在实验室模拟研究中 ,丙烷和丙烯在Pt—Rh型汽车尾气催化剂表面的催化氧化性能的差异 ,会对催化剂的起燃特性表现造成影响。
6)  polyvinyl alcohol
丙烯酸-丙烯酸纳
参考词条
补充资料：甲基丙烯酸甲酯、甲基丙烯酸丁酯、甲基丙烯酸的聚合物
CAS：28262-63-7
分子式：(C8H14O2·C5H8O2·C4H6O2)x

中文名称：2-甲基-2-丙烯酸与2-甲基-2-丙烯酸丁酯和2-甲基-2-丙烯酸甲酯的聚合物
甲基丙烯酸甲酯、甲基丙烯酸丁酯、甲基丙烯酸的聚合物

英文名称：2-Propenoic acid, 2-methyl-, polymer with butyl 2-methyl-2-propenoate and methyl 2-methyl-2-propenoate
Butyl methacrylate, methyl methacrylate, methacrylic acid polymer
说明：补充资料仅用于学习参考，请勿用于其它任何用途。