1) steel bonded titanium carbide
TiC钢结硬质合金
1.
Densification processing of a new steel bonded titanium carbide
新型TiC钢结硬质合金致密化技术
2.
A new fabrication route and its process parameters about the steel bonded titanium carbide had been investigated.
本论文研究了制备TiC钢结硬质合金材料的一种新的工艺路线，确定了其主要工艺参数。
2) TiC cermet/steel
TiC硬质合金/碳钢
1.
Investigation on microstructure at the bonding interface of TiC cermet/steel composite plate prepared by explosive welding;
TiC硬质合金/碳钢爆炸焊接复合板界面微观组织
3) TiC cemented carbide
TiC硬质合金
1.
Two kinds of complex wear resistant materials containing TiC cemented carbide granules and different compositions of metal matrices were obtained by an electric arc welding of the tungsten inert gas.
用钨极氩孤堆焊获得含有TiC硬质合金颗粒及金属基体成分不同的两种复合耐磨材料。
4) steel-bonded cemented carbide
钢结硬质合金
1.
WC steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
采用液相烧结法将爆炸压实后的WC钢结硬质合金粉末复合在碳钢表面,对不同烧结温度下的界面组织和抗剪强度进行了研究。
2.
Heat treatment technology of steel-bonded cemented carbide GW50 is analyzed,adopting ELID precise surface grinding technology instead of traditional grinding technology is put forward in this paper, product quality is ensured of adopting precise surface grinding technology for steel-bonded cemented carbide punching dies, and labor productivity is improved greatly.
分析了钢结硬质合金GW50的热处理工艺,提出采用ELID精密镜面磨削技术代替原来的传统磨削工艺,对钢结硬质合金模具进行精密磨削,使其能够满足产品质量要求,并提高了劳动生产率。
3.
Steel-bonded cemented carbide powder processed by explosive compaction was bonded to the surface of carbon steel through liquid phase sintering under 1350℃.
在烧结温度为1350℃时,采用液相烧结法将爆炸压实后的钢结硬质合金粉末复合在碳钢表面,获得了覆层材料。
5) steel bonded carbide
钢结硬质合金
1.
Microstructure and performance of in situ synthesis TiC/Cr19Al3 steel bonded carbides;
原位合成TiC/Cr19Al3钢结硬质合金组织与性能
2.
Study on in situ reactive synthesis of TiC/Cr18Ni8 steel bonded carbide;
TiC/Cr18Ni8不锈钢钢结硬质合金原位反应合成研究
3.
A study on in situ reactive synthesis of TiC/heat resistant steel-steel bonded carbides;
TiC/耐热钢钢结硬质合金原位反应合成研究
6) RB40 steel bonded carbide
RB40钢结硬质合金
1.
Select the RB40 steel bonded carbide material to produce heat forging bolt open-die, carry on forging and the strengthened compound heat treatment.
选用RB40钢结硬质合金新型工程材料制造热镦螺栓开式镦模,进行了锻造和复合强化热处理,试验表明,采用RB40钢结硬质合金代替3Cr2W8V,模具寿命提高20～25倍。
补充资料：硬质聚氨酯自结皮泡沫塑料
分子式：
CAS号：
性质：又称硬质聚氨酯整皮泡沫塑料。是一种表皮致密，芯部疏松的硬质泡沫塑料。泡孔开孔部分只占0.5%～1%，由多苯基多亚甲基二异氰酸酯和聚醚多元醇等制备。用RIM设备，用不同配方生产不同密度与壁厚的硬质聚氨酯自结皮泡沫。通过放入嵌件可扩大模塑制品的设计、应用范围。密度200～400kg/m3者可替代木材；密度400～800kg/m3者可制做要求承受较高物理应力的其他工，业品。用于建筑工业、汽车工业、家具、体育和娱乐行业。
CAS号：
性质：又称硬质聚氨酯整皮泡沫塑料。是一种表皮致密，芯部疏松的硬质泡沫塑料。泡孔开孔部分只占0.5%～1%，由多苯基多亚甲基二异氰酸酯和聚醚多元醇等制备。用RIM设备，用不同配方生产不同密度与壁厚的硬质聚氨酯自结皮泡沫。通过放入嵌件可扩大模塑制品的设计、应用范围。密度200～400kg/m3者可替代木材；密度400～800kg/m3者可制做要求承受较高物理应力的其他工，业品。用于建筑工业、汽车工业、家具、体育和娱乐行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条