1) Whisker Coating
晶须涂层
2) quasicrystalline coating
准晶涂层
1.
Influence of substrate thermal conductivity on the phase composition of high velocity oxy-fuel sprayed Al-Cu-Cr quasicrystalline coatings;
基体热导率对超音速火焰喷涂Al-Cu-Cr准晶涂层相组成的影响
3) amorphous coating
非晶涂层
1.
The recent research hotspots of thermal spraying are also reviewed,including the spraying amorphous coating,nanostructured coating and amorpho.
同时,对近几年热喷涂热点研究方向——热喷涂非晶涂层、纳米涂层以及非晶纳米晶复合涂层的发展进行阐述,并对先进热喷涂技术在铁路行业的进一步应用进行展望。
2.
It is pointed that as the new development trend of the material for arc spraying ,the powder cored wires can be tried to obtain the amorphous coating,metal ceramic coating and nanometer coating.
指出粉芯丝材作为电弧喷涂材料新的发展方向 ,可以用其尝试获得非晶涂层、金属陶瓷涂层及纳米涂层。
3.
The major results are summarized as follows:The amorphous coatings were prepared by arc spraying technology, the highest amorphous content attainable 65.
主要研究结果如下:采用电弧喷涂方法制备非晶涂层,涂层中非晶含量最高可达65。
4) microcrystalline coating
微晶涂层
1.
Processes such as alloying, fabricating multiphase alloys and composites, directional solidification, mechanical alloying, hot pressing and hot isostatic pressing, combustion synthesis and microcrystalline coating to improve mechanical properties and high temperature oxidation resistance properties of the alloys are reviewed and discussed.
对NiAl金属间化合物的国内外研究现状如改善NiAl合金力学性能和高温抗氧化性能等所 采用的合金化、制备多相合金、制备复合材料、定向凝固、机械合金化、热压及热等静压、燃烧合成、 微晶涂层等工艺以及NiAl合金的超塑性行为进行了系统综述,着重介绍并论述了合金化及定向 凝固等工艺。
2.
The isothermal and cyclic oxidation behaviors of cast NiAl and NiAlY alloys and sputtered NiAl microcrystalline coating were investigated at 1000℃ in air by TGA, XRD and SEM.
利用 ＴＧＡ，ＸＲＤ，ＳＥＭ对铸造β－ＮｉＡｌ和ＮｉＡｌＹ合金以及溅射ＮｉＡｌ微晶涂层在１０００℃空气中的恒温及循环氧化行为进行了研究，三种材料的恒温氧化动力学均近似符合抛物线规律，氧化过程中都有相变发生，微晶化能够促使细小、紧密、单一完整的α－Ａｌ２Ｏ３氧化膜形成，同时微晶化与添加稀土元素Ｙ均明显提高循环氧化过程中氧化膜的粘附性。
3.
Ni-5Cr-5A1(at% ) microcrystalline coating was prepared on the substrate of the are material by magnetron sputtering.
利用磁控溅射在Ｍ－５Ｃｒ－５Ａ１（原子分数，％）合金上制备与基体相同成分的微晶涂层。
5) ultrafine crystal coating
超细晶涂层
6) NiAl microcrystalline coating
NiAl微晶涂层
1.
The effect of NiAl microcrystalline coating prepared by magnetron-sputtering on the isothermal oxidation behaviors of two NiAl-based eutectic alloys was investigated in static air at 1000-1150℃.
研究了磁控溅射NiAl微晶涂层对NiAl-28Cr-5Mo-1Hf和NiAl-33。
补充资料：多晶莫来石晶须(纤维)
分子式：
CAS号：
性质：莫来石相为主晶相的多晶纤维。化学成分为Al2O3 72％～77％，SiO222％～17％，B2O3 3％～5％，P2O51.5％～3.0％。纤维直径2～7μm，纤维长度20～125μm。使用温度1350℃。多采用溶胶-凝胶法制造。主要用作补强填料，也可作为轻质、隔热保温材料使用。
CAS号：
性质：莫来石相为主晶相的多晶纤维。化学成分为Al2O3 72％～77％，SiO222％～17％，B2O3 3％～5％，P2O51.5％～3.0％。纤维直径2～7μm，纤维长度20～125μm。使用温度1350℃。多采用溶胶-凝胶法制造。主要用作补强填料，也可作为轻质、隔热保温材料使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条