2) photocatalytic compound
复合体光催化剂
1.
Based on preparation of SnO_2 sol by sol-gel method,nano-meter photocatalytic compound of TiO_2/SnO_2 was prepared and the atom ratio of titanium to tin on the surface is 85∶15(by XPS analysis).
在采用溶胶-凝胶法制备SnO2溶胶的基础上,制备出表面Ti/Sn原子比为85∶15(XPS全谱分析)的TiO2/SnO2复合体光催化剂;用于硫磷农药废水的降解,试验结果表明:复合体光催化剂比单一TiO2催化剂的催化活性要高,其原因是由于复合TiO2/SnO2催化剂中SnO2可接收电子,减少了TiO2电子-空穴对的复合,从而提高其催化活性。
4) solid composite catalyst
固体复合催化剂
5) Compound catalyst
复合催化剂
1.
Adopts sol-gel method to prepare the P25/SnO2 compound catalyst,taking the photo-catalytic degradation of reactive brilliant red X-3B as a model,to research several factors which in-fluence the reaction.
采用溶胶-凝胶法制备P25/SnO2复合催化剂,以活性艳红X-3B溶液光催化降解反应为模型,研究各种因素对活性艳红X-3B光催化降解的影响。
2.
Fresh MnO2/attapulgite was used as compound catalyst for ozonation of phenol in aqueous solutions,and the different conditions of catalytic ozonation have been investigated.
利用化学法合成了新生态MnO2/凹凸棒土复合催化剂,对模拟苯酚废水进行了臭氧化处理,考察了不同条件对苯酚催化臭氧化过程的影响。
3.
According to the experimental results, the catalytic activity of compound catalyst at the best composition is more effective compared with potassium carbonate, which is well known as a best catalyst.
利用综合热分析仪进行了Ni-K复合催化剂对神府煤的催化气化实验研究,结果发现,复合催化剂有较高的催化活性,在最佳配比时较目前公认催化活性最好的单组分催化剂K2CO3要高,并得出复合催化剂的催化作用机理为:当温度达到反应温度时,液态金属熔融盐增大了离子间的接触,使协同作用成为可能,从而提高了催化剂的催化活性。
6) compounded catalyst
复合催化剂
1.
By co-supporting of metallocene catalyst—bis(tetramethylcyclopendaienyl)zirconium dichloride(TMCP)and Schiff base catalyst—bisN-cyclohexyl-(3-t-butylsalicylidene imine)zirconium dichloride(FI)on silica gel,TMCP-FI compounded catalyst was prepared.
将茂金属催化剂四甲基环戊二烯二氯二茂锆(TMCP)和Schiff碱单活性中心催化剂双[N-环己基-(3-叔丁基水杨醛亚胺基)]二氯化锆(FI)同时负载到硅胶上得到TMCP-FI复合催化剂。
2.
The non - toxic acetyl tributyy citrate was synthsized by tributyl citrate and acetyloxide in the presence of compounded catalyst.
由柠檬酸和正丁醇在复合催化剂存在下合成柠檬酸三丁酯。
补充资料：复合催化剂BA-3
分子式：
分子量：
CAS号：
性质：白色结晶，溶于水。系树脂整理高效催化剂，用于纺织印染树脂整理。使用配方为复合催化剂BA-3 0.11千克，渗透剂JFC 0.5千克，柔软剂VS 10千克，45%的树脂2D（二羟甲基二羟基乙烯脲）50千克，用水稀释到一定体积使用。由氟硼酸钠和柠檬酸铵复合而成。
分子量：
CAS号：
性质：白色结晶，溶于水。系树脂整理高效催化剂，用于纺织印染树脂整理。使用配方为复合催化剂BA-3 0.11千克，渗透剂JFC 0.5千克，柔软剂VS 10千克，45%的树脂2D（二羟甲基二羟基乙烯脲）50千克，用水稀释到一定体积使用。由氟硼酸钠和柠檬酸铵复合而成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条