2) porous material
多孔材料
1.
Study on the preparation of poly(styrene/divinylbenzene) porous materials by high internal phase emulsions as templates;
聚苯乙烯/二乙烯基苯多孔材料的制备工艺研究
2.
Preparation and characteristics of Ti-Al based alloy porous material;
Ti-Al系金属间化合物多孔材料的制备和性能
3.
Research progress in the preparation of highly porous materials by concentrated emulsions as templates;
新型聚合物多孔材料的制备研究进展
3) cellular material
多孔材料
1.
The application and discussion of cellular material in highway noise reduction;
多孔材料在公路吸声降噪上的应用与探讨
2.
Micro-structure Design and Analysis for Cellular Material Based on ANSYS;
基于ANSYS的多孔材料微结构设计与分析
3.
A microstructure based acoustic model is introduced,which can be used to optimize the microstructure of cellular materials and thus to obtain their optimal acoustic property.
介绍了一种基于微结构的声学模型,可用来对多孔材料的微组织结构进行优化,从而使多孔材料具备最佳的声学性能。
4) cellular materials
多孔材料
1.
The in-plane dynamic crushing behavior of cellular materials is studied in this paper using Voronoi model and finite element method.
利用生成的Voronoi随机模型,结合有限元分析方法详细研究了多孔材料在x1-x2平面内冲击载荷作用下的动态特性。
2.
Cellular materials are known to have many outstanding combinations of physical and mechanical properties.
用空心球经过烧结或粘结制成的空心球泡沫材料是一种典型的多孔材料。
3.
At the same time, cellular materials have the merits including relative low-density, thermal insulation, conflagrant retardancy.
由于具有良好的力学性能和能量吸收的能力,多孔材料被广泛用于交通、航空航天和包装工业等领域中。
5) porous materials
多孔材料
1.
Contrastive experiment on heat transfer characteristic of porous materials;
多孔材料传冷特性的对比试验
2.
Sound absorbing properties of stainless steel fiber porous materials;
不锈钢纤维多孔材料的吸声性能
6) porous
[英]['pɔ:rəs] [美]['pɔrəs]
多孔材料
1.
Porous materials, such as SBA-15, MCM-41, Activated Carbon, have been widely used in adsorption field because of its extensive surface area, micro/mesoporous structure, high adsorption capacity, and high degree of surface reactivity.
多孔材料,如介孔SBA-15、MCM-41、活性炭等由于具有较高的比表面积和孔体积,比较均匀的孔径分布等一系列特点,因而在催化、吸附方面具有广阔的应用前景。
2.
Preparation of porous materials via concentrated emulsion templating method is to polymerize the continuous phase at certain temperature, and then the porous monolith can be obtained when the polymerization completed after cleaning.
浓乳液模板法(Concentrated emulsion templating)制备多孔材料是将浓乳液的连续相作为聚合相,在一定温度下进行聚合反应,聚合结束后经洗涤干燥即可得到多孔结构的聚合物材料。
补充资料:多孔窑
分子式:
CAS号:
性质:又称多通道窑。由多通道分层排列的小截面隧道窑构成的窑。相邻通道的坯体常以反向运行有利于余热充分利用。一般分为隔焰或半隔焰式,燃烧产物在隔焰通内通过;用气体燃料时也可用明焰式。为使窑内温度上下均匀可采用设置挡墙,迫使气流上下呈波浪形流动。这种窑热效率高,占地面积小,但操作稍复杂。主要用于面砖等小件产品的烧成。
CAS号:
性质:又称多通道窑。由多通道分层排列的小截面隧道窑构成的窑。相邻通道的坯体常以反向运行有利于余热充分利用。一般分为隔焰或半隔焰式,燃烧产物在隔焰通内通过;用气体燃料时也可用明焰式。为使窑内温度上下均匀可采用设置挡墙,迫使气流上下呈波浪形流动。这种窑热效率高,占地面积小,但操作稍复杂。主要用于面砖等小件产品的烧成。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条