1) Hybrid lap welding
复合热源搭接
2) hybrid welding
复合热源焊接
1.
Welding characteristics of laser-low power pulse MIG hybrid welding aluminium alloy;
铝合金激光—小功率脉冲MIG电弧复合热源焊接特性分析
2.
Influence of Nd:YAG laser+pulsed GMAW arc hybrid welding parameters on weld width;
Nd:YAG激光+脉冲GMAW复合热源焊接参数对焊缝熔宽的影响
3.
The reinforcement-to-width ratio,which was used to indicate the weld metal spreadability,and reinforcement were used to elevate weld appearance in Nd:YAG laser + pulsed MAG(Metal Active Gas) arc hybrid welding.
利用余高-熔宽比表示焊缝表面铺展性并与焊缝余高一起作为参数来评价激光+电弧复合热源焊缝的表面成形,通过试验研究了Nd:YAG激光+脉冲MAG电弧复合热源焊接过程中焊接规范参数对复合热源焊缝表面成形的影响,并分析了激光对复合热源焊缝表面成形的影响。
3) hybrid welding
复合热源
1.
Analysis for local incomplete brazing in fusion-brazed joints between aluminium and zinc-coated steel by hybrid welding;
铝/镀锌钢复合热源熔—钎接头的局部“未钎合”缺陷分析
2.
Analysis for Al-Fe intermetallic compounds layer of fusion-brazed joints between aluminium and zinc-coated steel by hybrid welding;
铝/镀锌钢复合热源熔—钎接头中的Al-Fe金属间化合物层分析
3.
Braze-welding for dissimilar metals between copper and steel by Nd:YAG laser-plused MIG hybrid welding;
铜/镀锌钢异种金属Nd:YAG激光脉冲MIG复合热源钎接焊
4) hybrid heat source
复合热源
1.
Study on the characteristics of applying hybrid heat source LiBr Absorption refrigerating unit by waste heat
利用多种余热的复合热源型溴化锂制冷机组特性分析
5) compound source
复合热源
1.
In view of the disadvantages of the air source heat pump in heat supply and the characteristics of the application of solar energy heat pump, a compound source heat pump using air and solar energy as low-order heat source was put forward, which has two parallel evaporators under heating condition and two parallel condensers under refrigerating condition.
针对空气源热泵用于冬季供热时存在的不足及太阳能热泵应用特点,提出可同时利用空气和太阳能两种低位热源的复合热源热泵模式:制热工况时,该热泵机组有两个并联的蒸发器;制冷工况时,机组有两个并联的冷凝器。
6) Laser-TIG welding
激光-氩弧复合热源焊接
补充资料：黏合搭接接头
分子式：
CAS号：
性质：两个被粘物部分叠合粘接在一起形成的接头。搭接比对接形式抗剪强度高，而且可靠，是一种十分普遍使用的粘接形式。
CAS号：
性质：两个被粘物部分叠合粘接在一起形成的接头。搭接比对接形式抗剪强度高，而且可靠，是一种十分普遍使用的粘接形式。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条