1.
Technological Investigation on Laser-MAG Hybrid Welding of High Strength Steels
高强钢激光-MAG复合热源焊接工艺研究
2.
Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31
AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响
3.
Study of Laser-TIG Hybrid Welding Process for Magnesium Alloy and Its Numerical Simulation;
镁合金复合热源焊接工艺与数值模拟研究
4.
Research on Studs Hybrid Heat Source Welding Technology and the Theoretical Test Prototype;
附座复合热源焊接方法与原理试验样机的研究
5.
Analysis of Droplet Transfer Behavior in CO_2 Laser-MIG Hybrid Welding Process;
CO_2激光-MIG复合热源焊接熔滴过渡的行为分析
6.
On the Characteristics of Nd: YAG Laser-Short Circuiting Transfer GMA Hybrid Welding
Nd：YAG激光—短路过渡GMAW复合热源焊接特性研究
7.
Finite Element Analysis of the Welding Temperature Profiles and Thermal Distortion in Laser +GMAW Hybrid Welding Process;
激光+GMAW复合热源焊接温度场和热变形的有限元分析
8.
Study on Laser-metal Active Gas (MAG) Hybrid Welding Technology and Its Mechanism of Stainless Steel;
不锈钢激光-MAG电弧复合热源焊接工艺及机理研究
9.
Study on the Laser-TIG Hybrid Welding of Dissimilar Magnesium Alloy and Steel with Ni as Interlayer
镁/钢异种金属激光-TIG复合热源镍夹层焊接研究
10.
Appearance of weld and impact toughness for the joints of ferrite stainless steel by laser-MAG hybrid welding
铁素体不锈钢激光-MAG复合热源焊缝成形及接头冲击韧性分析
11.
This article breifly introduces polymer matrix composites and highights a number of welding processes, such as hot plate welding, infrared welding, induction welding, vibration welding and ultrasonic welding, etc.
本文主要介绍了热塑性复合材料的若干种焊接方法，如热板焊、红外焊、应焊、动焊、声波焊等。
12.
Numerical Simulation of Weld Formation in Laser+GMAW-P Hybrid Welding
激光+GMAW-P复合热源焊焊缝成形的数值模拟
13.
Welding Torch Research and Technological Experiment for Automatic Stud Welding with Hybrid Resource
复合热源自动螺柱焊焊枪装置研制及工艺试验
14.
Welding of 16MnR+00Cr17Ni14Mo2 Composite Pipe
16MnR+00Cr17Ni14Mo2复合管焊接
15.
EFFECT OF ARC POWER ON THERMAL FIELD CHARACTERISTICS OF LASER+GMAW-P HYBRID WELDING
电弧功率对Laser+GMAW-P复合热源焊热场特征的影响
16.
Fusion-brazing Joining for Dissimilar Metals Between 5A02 Aluminium Alloy and Zinc-coated Steel Based on Laser-MIG Hybrid Welding
基于激光——MIG复合热源的5A02铝合金/镀锌钢熔——钎焊
17.
Application of combined welding heat source in arc welding simulation
组合热源模型在焊接数值模拟中的应用
18.
Research on Stud Welding and Middle-thickness Board with Compound Heat Source;
螺柱与中厚高强钢复合热源螺柱焊试验研究