1) sintering additive
烧胀助剂
1.
Effects of sintering additive on properties of high-strength ceramsite;
烧胀助剂对高强粉煤灰陶粒性能的影响
2) Sintering Additives
烧结助剂
1.
Activated sintering and sintering additives for silicon carbide ceramics;
碳化硅陶瓷的活化烧结与烧结助剂
2.
Effects of sintering additives of Co_2O_3 on properties of Ce_(0.8)Gd_(0.2)O_(1.9);
烧结助剂Co_2O_3对Ce_(0.8)Gd_(0.2)O_(1.9)性能的影响
3.
The choice of AlN sintering additives and five sintering technologies were analysed,namely hot pressi.
介绍AlN陶瓷的典型性能和导热机理;讨论AlN粉末的5种合成方法:铝粉直接氮化法、Al2O3碳热还原法、化学气相沉积法、溶胶?凝胶法、自蔓延高温合成法和等离子化学合成法;分析AlN烧结助剂的选择和5种烧结工艺:热压烧结、无压烧结、放电等离子烧结、微波烧结及自蔓延烧结;阐述AlN基板的制备工艺及其影响因素。
3) sintering aid
烧结助剂
1.
Influence of sintering aids on pressureless sintering of Sialon ceramics;
烧结助剂对Sialon常压烧结的影响
2.
Effect of sintering aids on reaction-bonded Si_3N_4-BN composites;
烧结助剂对反应烧结Si_3N_4-BN复合材料的影响
3.
Research progress of low-temperature sintering aids of AlN ceramic
低温烧结氮化铝陶瓷烧结助剂的研究进展
4) sintering aids
烧结助剂
1.
Experiment study on AlN ceramics low-temperature sintering aids;
氮化铝陶瓷低温烧结助剂体系的研究
2.
The influences of sintering aids Al2O3-Y2O3on sintering performance of B4C/B-Al composites were studied in vacuum carbon tube furnace under argon atmosphere at 1 850 ℃ holding 1.
5 h、真空碳管炉氩气保护条件下研究了烧结助剂Al2O3-Y2O3对B4C/B-Al复合材料烧结性能的影响。
3.
Spark plasma sintering(SPS) was applied to prepare α-Si3N4 ceramics of different controlled densities with magnesia,silicon dioxide,alumina as the sintering aids and the relationship between density of samples,the content of sintering aids and dielectric property was explored.
以MgO、Al2O3和SiO2作为烧结助剂,采用放电等离子烧结(SPS)方法制备密度可控的α-Si3N4陶瓷材料。
5) Sintering aids
助烧剂
1.
In this paper,focus on sintering aids,the sintering activation technology of titanium diboride cer.
主要从添加助烧剂和烧结技术两方面介绍了TiB2陶瓷活化烧结方法的研究进展,并分析了该技术促进材料烧结致密化的机制,同时介绍了热压烧结和放电等离子(SPS)烧结技术。
2.
TiB_2 based cermet with Fe-Ni-Ti-Al as sintering aids was fabricated by hot-pressing.
以Fe Ni Ti Al为助烧剂,用热压的方法制备了TiB2基金属陶瓷。
3.
In order to realize the overall sintering of chromic acid lanthanum heating element,it is necessary to add sintering aids in it.
为了使铬酸镧发热元件能够整体烧结,成型前在铬酸镧粉末中加入助烧剂,将收缩率调节一致。
6) additives
烧结助剂
1.
Effects of sintering additives and process on density and thermal conductivity of BeO ceramic;
烧结助剂和工艺对BeO陶瓷密度和热导率的影响
2.
Silicon nitride ceramics were prepared by hot-press sintering method using α-Si3N4 power with short chopping carbon-fiber as starting materials,Y2O3-La2O3 and LiF-MgO-SiO2 as additives,respectively.
采用Y2O3-La2O3和LiF-MgO-SiO22组烧结助剂,通过短切碳纤维增韧的方法,热压烧结制备了氮化硅陶瓷,并对所得氮化硅陶瓷的相组成、微观结构和力学性能进行了分析和讨论。
3.
The effects of additives to Si3N4 matrix layers on microstructure and properties of laminated Si3N4/BN ceramics were studied.
研究了MgO-Y2O3-Al2O3体系(相应的层状复合陶瓷试样记为A)、Y2O3-Al2O3体系(相应的层状复合陶瓷试样记为B)及La2O3-Y2O3-Al2O3体系(相应的层状复合陶瓷试样记为C)烧结助剂对Si3N4/BN层状复合陶瓷结构与性能的影响。
补充资料：烧酱烧排骨
烧酱烧排骨
主 料： 排骨.
配 料： 腌料：*烧酱3汤匙，蒜茸粉、生粉各1汤匙，黑椒粉1/2茶匙，蚝油、生油各2汤匙，盐1茶匙，混合香草2茶匙。
做 法： 1、排骨洗净，在表面划井字纹，抹干身备用。
2、将腌料充分拌匀成厚浆状，均匀涂在肉排表面，放置2-3小时。
3、送进中火之焗炉中焗至表面金黄熟透即成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。