1) liquid phase sintering
液相助烧剂
2) liquid phase sintering additiues
液相烧结添加剂
3) Sintering Additives
烧结助剂
1.
Activated sintering and sintering additives for silicon carbide ceramics;
碳化硅陶瓷的活化烧结与烧结助剂
2.
Effects of sintering additives of Co_2O_3 on properties of Ce_(0.8)Gd_(0.2)O_(1.9);
烧结助剂Co_2O_3对Ce_(0.8)Gd_(0.2)O_(1.9)性能的影响
3.
The choice of AlN sintering additives and five sintering technologies were analysed,namely hot pressi.
介绍AlN陶瓷的典型性能和导热机理;讨论AlN粉末的5种合成方法:铝粉直接氮化法、Al2O3碳热还原法、化学气相沉积法、溶胶?凝胶法、自蔓延高温合成法和等离子化学合成法;分析AlN烧结助剂的选择和5种烧结工艺:热压烧结、无压烧结、放电等离子烧结、微波烧结及自蔓延烧结;阐述AlN基板的制备工艺及其影响因素。
4) sintering aid
烧结助剂
1.
Influence of sintering aids on pressureless sintering of Sialon ceramics;
烧结助剂对Sialon常压烧结的影响
2.
Effect of sintering aids on reaction-bonded Si_3N_4-BN composites;
烧结助剂对反应烧结Si_3N_4-BN复合材料的影响
3.
Research progress of low-temperature sintering aids of AlN ceramic
低温烧结氮化铝陶瓷烧结助剂的研究进展
5) sintering aids
烧结助剂
1.
Experiment study on AlN ceramics low-temperature sintering aids;
氮化铝陶瓷低温烧结助剂体系的研究
2.
The influences of sintering aids Al2O3-Y2O3on sintering performance of B4C/B-Al composites were studied in vacuum carbon tube furnace under argon atmosphere at 1 850 ℃ holding 1.
5 h、真空碳管炉氩气保护条件下研究了烧结助剂Al2O3-Y2O3对B4C/B-Al复合材料烧结性能的影响。
3.
Spark plasma sintering(SPS) was applied to prepare α-Si3N4 ceramics of different controlled densities with magnesia,silicon dioxide,alumina as the sintering aids and the relationship between density of samples,the content of sintering aids and dielectric property was explored.
以MgO、Al2O3和SiO2作为烧结助剂,采用放电等离子烧结(SPS)方法制备密度可控的α-Si3N4陶瓷材料。
6) Sintering aids
助烧剂
1.
In this paper,focus on sintering aids,the sintering activation technology of titanium diboride cer.
主要从添加助烧剂和烧结技术两方面介绍了TiB2陶瓷活化烧结方法的研究进展,并分析了该技术促进材料烧结致密化的机制,同时介绍了热压烧结和放电等离子(SPS)烧结技术。
2.
TiB_2 based cermet with Fe-Ni-Ti-Al as sintering aids was fabricated by hot-pressing.
以Fe Ni Ti Al为助烧剂,用热压的方法制备了TiB2基金属陶瓷。
3.
In order to realize the overall sintering of chromic acid lanthanum heating element,it is necessary to add sintering aids in it.
为了使铬酸镧发热元件能够整体烧结,成型前在铬酸镧粉末中加入助烧剂,将收缩率调节一致。
补充资料：路见不平，拔剑相助
1.同"路见不平，拔刀相助"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条