1) foaming efficiency
发泡效率
2) foaming effect
发泡效果
1.
The foaming effect,structure of foam,mutual solubility of polyether compounds and bubble mechanical properties of blowing agent HFC-365mfc,HFC-365/227 and water have been studied through the preparation of polyether compounds and rigid polyurethane foam and compared with HCFC-141b.
通过组合聚醚与聚氨酯硬泡的制备,对发泡剂HFC-365mfc、HFC-365/227和水的发泡效果、泡体结构、与组合聚醚的互溶性及泡体力学性能等进行了研究,并与HCFC-141b进行了比较。
3) foaming performance
发泡效果
1.
In this paper,the influences of different agents,there addition quantity and particle size on the foaming performance of the refining slag with high basicity were investigated.
本文系统研究了发泡剂种类、加入量和粒度对高碱度精炼渣发泡效果的影响。
2.
The favorable foaming performance of refining slag is the most important factor that influences the achievement of hiding electric arc for LF.
本文在实验室条件下系统研究了温度、气量、成分和发泡剂对高碱度合成精炼渣发泡效果的影响,结果表明,相对发泡高度随熔渣黏度的增大、表面张力和密度的减小而增大；在精炼渣成分一定时,随温度升高和吹气量增加,熔渣相对发泡高度都有先增加后降低的趋势。
4) the late effect of making bubbles
发泡后效
1.
There usually is the problem of the late effect of making bubbles in emulsion explosive when people adopt the way of making bubbles to sensitize emulsion explosive by chemical reaction in production, and there is bad influence in product quality.
乳化炸药生产中采用的化学发泡敏化方式 ,往往会产生后效问题 ,给产品的质量带来很大的影响 ,提出了对克服发泡后效的方法 ,并对其进行了理论上的分析论证 ,通过生产中的实验 ,证明是切实可行的 ,并对生产工艺进行了调整 ,解决了发泡后效问题 ,提高了产品质量 ,取得了良好的效果。
5) foaming rate
发泡速率
1.
Effects of such factors as formaldehyde-to-phenol molar ratio,manufacturing temperature were studied to investigate how they influenced the curing and foaming rate.
提出了一种在石蜡油浴中搅拌状态下制备中空酚醛微球的新方法,研究了甲醛苯酚单体配比、制备温度对固化速率与发泡速率的影响。
6) foamability
发泡倍率
1.
When the amount of foaming agent was 15% and the content of silicone AK8805 was 9% the foamability of the foaming system could reach 43.
当发泡剂含量为15%、有机硅AK8805的含量为9%时,该发泡体系的发泡倍率可达到43。
2.
The effects of the content of foaming agent as well as the kinds and content of foam stable agent on the foamability and the adhesion strength were investigated.
以环氧树脂和丙烯酸为基本原料,合成环氧丙烯酸酯,采取氧化还原引发方式,用环氧丙烯酸酯及其它活性单体和添加剂制备出一种室温快固型发泡胶粘剂;考虑了发泡剂用量、泡沫稳定剂种类及用量对发泡倍率和粘接强度的影响。
补充资料：配置效率和生产效率
在经济学上，经济发展的动力，或者说效率的来源，分为两类：一类是配置效率，二是生产效率。所谓配置效率，是指给定资源和技术的条件下，怎么样使资源从边际生产率低的地方流向边际生产率高的地方，从而使得资源和利用更合理、社会总价值达到最大;而生产效率是指如何通过技术进步提高每一种资源的生产率，也就是把社会的生产可行性边界向外移。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条