说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> XY定位平台
1)  XY table
XY定位平台
2)  integrated micro xy-stage
集成式微型xy定位平台
3)  xy table
xy平台
1.
The dynamics and kinematics of a plane double inverted pendulum over an XY table is analyzed.
对基于XY平台的平面两级倒立摆进行了运动学和动力学分析,由于系统具有很强的非线性以及耦合等特性,需要在其平衡点附近线性化,以得到系统的近似线性状态方程。
2.
To weaken the influences of parameter perturbed, load disturbances, and the velocity mismatch between X axis and Y axis to the contour precision of XY table servo system driveled by Permanent Magnet Linear Synchronous Motors, a compound control scheme based on combining robust l\ control and variable gain cross-coupled control is presented in this paper, t.
本文以辽宁省自然科学基金项目(20052045)及辽宁省教育厅基金(2004F014)为背景,针对XY平台用永磁直线同步电机伺服系统易受到加工工件参数摄动,外部负载扰动及双轴响应速度不匹配影响的特点,采用鲁棒l_1控制设计单轴速度控制器,并在X、Y轴间加入变增益交叉耦合控制器,以提高XY平台直线伺服系统的轮廓精度。
3.
The nonlinear system dynamic,complicated contour error model of curve path and irregular parameter adjustment of conventional control can affect the contour accuracy of XY table directly driven by two permanent magnet linear synchronous motors(PMLSM).
对于直线电机驱动XY平台,非线性的系统动态、曲线轨迹的轮廓误差模型相对复杂以及传统控制无系统化参数调整规则等问题影响其轮廓加工精度。
4)  micro XY stage
微XY平台
1.
The high-density data storage technology including the micro XY stage and micro probe arrays as well as the data storage medium with super high storage function has become the focus of research.
静电驱动的微XY平台、微探针阵列及具有超高密度存储功能的记录介质相结合的高密度数据存储技术是目前的研究热点。
5)  Positioning Stage
定位平台
1.
A two degrees of freedom (DOF) positioning stage using novel linear ultrasonic motors is presented.
搭建了一种新型两自由度精密定位平台,主要由直线型超声电机、直线导轨、工作台三部分组成。
2.
Error Modeling and Compensation of Linear Motors Positioning Stage;
首先分析了定位平台的误差来源,采用激光矢量测量方法测量工作台的定位误差;然后用最小二乘法分别建立工作台的分段线性,用BP算法建立神经网络误差模型,利用误差模型构造了各电动机的一维或二维误差校正表;最后,根据误差校正表进行误差实时补偿实验。
6)  positioning table
定位平台
1.
Nonlinear friction compensation based on neural networks for the positioning table;
定位平台非线性摩擦的神经网络补偿
2.
The motion control system of two-dimension positioning table based on GT-SV-400 motion control card is developed, which adopt the structure of "NC+PC".
基于GT_SV_400运动控制卡,采用"NC+PC"开放式结构,设计出了二维定位平台运动控制系统,并通过软件程序对定位误差进行了补偿,最终实现了系统工作行程200mm,定位精度±5μm。
3.
To develop a high speed and high performance precision positioning table for wire bonding machine,a 2D precision positioning table with air bearings was presented.
为提高引线键合机定位机构的运动速度和定位精度,提出了一种基于气浮导轨支撑的两自由度高速精密定位平台。
补充资料:8,9,10-tetrahydro-6,8,11-trihydroxy-8-(hydroxyacetyl)-1-methoxy-xy)- hydroc
CAS: 25316-40-9
分子式: C27H29NO11
分子质量: 580.02

中文名称: 阿得里亚霉素;14-羟正定霉素

英文名称: 8,9,10-tetrahydro-6,8,11-trihydroxy-8-(hydroxyacetyl)-1-methoxy-xy)- hydroc
(8s-cis)-hlorid
admhydrochloride
adriacin
adriamycin, hydrochloride
doxorubicin hydrochloride

性质描述: 盐酸盐为桔红色针状结晶,熔点204-205℃。溶于水和醇,不溶于丙酮;苯;氯仿;乙醚。

生产方法: 由松链丝菌浅灰色变株(Str.Peucetius var.Caesius)的培养液提取而得。本品化学结构与柔红霉素类似,因此可以由柔红霉素化学转化而制得。目前已可化学全合成。

用途: 癌症化疗剂;主要用于急;慢性白血病;恶性淋巴瘤。


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条