1) Roller ring used in high speed Line or ban rolling mill
高速线、棒材轧机辊环
2) high-speed wire roller
高速线材轧辊
1.
The rupture often happens when the high-speed wire roller endures exchanging stress.
工作时受交变应力的作用,高速线材轧辊断裂问题时有发生。
3) high speed wire mill
高速线材轧机
1.
In rolling production by high speed wire mill, tension condition between finish rolling mill and pinch roll could be controlled by use of selecting good groove shape and diameter of pinch roll,well pinch mode, and by adjustment on clearance and speed of the pinch rolls.
在高速线材轧机上 ,轧制不同规格的产品时 ,通过适当选择夹送辊的槽形及辊径、夹送方式 ,并对夹送辊辊缝、夹送辊速度等进行联合调整 ,可以保证精轧—夹送辊之间处于合适的张力控制状态 ,实现稳定轧制。
2.
Test of production of highCarbon steel by revolting furnaceLF furnacecontinuous casterhigh speed wire mill was done.
进行了转炉—精炼炉—连铸—高速线材轧机生产高碳钢盘条的生产试验，结果表明：所生产的６５钢质量较好，连铸坯表面质量较佳，经高速线材轧机轧成的盘卷，用作钢丝生产的原料时，其拉拔性能好、消耗低。
3.
The construction situation and development of high speed wire mill in our country are introduced.
介绍了我国高速线材轧机的建设和发展状况； 对引进新轧机的设备特点、引进二手设备的生产和改造情况及我国设计制造高速线材轧机技术水平不断提高的情况进行了较全面的分析和介绍， 并指出今后高速线材轧机应采用的几种新技术。
4) high-speed wire rod mill
高速线材轧机
1.
Current situation and prospect of products of high-speed wire rod mill of Baosteel;
宝钢高速线材轧机的产品现状及展望
2.
The structure selection and application of roller guide and guard units are introduced which are used in the high-speed wire rod mill in Anyang Iron & Steel Co.
介绍了安阳钢铁股份有限公司高速线材轧机滚动导卫装置的概况、结构选择和应用要点,同时介绍了关键工艺参数的设计方法。
3.
The choice,installation,cooling and cooling water quality requirement of carbide roll ring were introduced,which used in high-speed wire rod mill of Chongqing Iron and Steel Co.
介绍了重庆钢铁股份有限公司高速线材轧机硬质合金辊环的选择、安装、冷却以及其对水质的要求,并简要介绍了生产中轧槽轧制量的设定,以及轧槽的磨损与修复等。
5) high-speed rod-rolling mill
高速线材精轧机
1.
In this paper,a fault monitor approach for high-speed rod-rolling mill is realized by collecting and analyzing its fault signals and finding out its fault characteristic parameters with the theory of neural network.
在对高速线材精轧机常见故障分析研究的基础上,通过对设备振动信号的采集、处理和提取特征参数的方法,结合人工神经网络原理,对其故障进行智能监测与诊断。
6) high speed wire rod mill
高速线材轧机
1.
Axial constant-pressure roll mandrel fastening structure In high speed wire rod mill;
高速线材轧机轧辊轴轴向恒压紧固
2.
Technological Characteristic for Manufacfuring of the Ribbed Bar Coil With High Speed Wire Rod Mill;
高速线材轧机生产螺纹钢盘卷的工艺特点
3.
Based on the production of Angang high speed wire rod mill, The paper analyzed the main control function of high speed wire rod mill: speed adaptaion, loop control, minimum tension control, material traching, etc.
结合安钢高速线材轧机生产线的情况 ,对高速线材轧机轧线主要控制功能 :速度自适应、活套控制、微张力控制、物料跟踪等进行了分析。
补充资料：宝山钢铁(集团)公司热轧带钢厂粗轧机组后的辊道保温
宝山钢铁(集团)公司热轧带钢厂粗轧机组后的辊道保温
宝山钢铁(集团)公司热轧带钢厂粗轧机组后的辊道保温
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条