1) Nickel-base alloy UNS N06600 seamless steel tube
镍基合金UNSN06600无缝管
2) Si Mn system seamless steel tube
Si-Mn合金无缝管
3) nickel-based alloy
镍基合金
1.
Studies of static recrystallization of new nickel-based alloy;
新型镍基合金静态再结晶规律研究
2.
Analysis of two nickel-based alloys used in absorber of wet flue gas desulphurization in coal-fired power plant
燃煤电厂湿法烟气脱硫吸收塔镍基合金材料国产化可行性分析
4) nickel-base alloy
镍基合金
1.
Determination of trace elements in steel, nickel-base alloy and zircaloy using time of flight inductively coupled plasma mass spectrometry;
飞行时间-电感耦合等离子体质谱法测定钢、镍基合金及锆锡合金中痕量元素(英文)
2.
This paper was based on engineering practice experience, nickel-base alloy, graphite and F4-lined steelhad been applicated in fluorination for a long time, their use condition and anticorrosion instances were introduced.
本文依据工程实践经验,介绍了镍基合金、石墨、钢衬聚四氟乙烯三种材料的应用防腐情况、使用条件,对于氟化选材有指导意义。
3.
The high-chromium cast iron and nickel-base alloy Ni60 have been studied.
以高铬铸铁和镍基合金Ni60作为研究对象,研究了金相组织对耐磨性的影响。
5) Ni-based alloy
镍基合金
1.
Study on laser cladding of γ-TiAl alloy coating on Ni-based alloy;
镍基合金激光熔覆γ-TiAl基合金涂层组织研究
2.
Wear resistance of laser clad Co-based alloy coating on Ni-based alloy
镍基合金表面激光熔覆钴基合金涂层的耐磨性能
3.
Thermodynamic simulation calculation of precipitation phase in modified inconel 718 Ni-based alloy
改型In718镍基合金析出相的热力学模拟计算
6) nickel alloy
镍基合金
1.
Welding for nickel alloy steel plate;
镍基合金复合钢板的焊接
2.
Determination of trace aluminum in nickel alloy by inductively coupled plasma atomic emission spectrometry;
ICP-AES法测定镍基合金中微量铌的质量分数
3.
Recovery of nickel and cobalt from electromachining sludge of nickel alloy;
镍基合金电解加工渣泥中镍和钴的回收
补充资料：低温铁镍基超合金
分子式：
CAS号：
性质：适于深冷条件使用的沉淀强化型铁镍基奥氏体超合金。这类合金在常温及低温下都具有高强度及好的塑性，其主要用途是制作内冷缆式超导体(ICCS)的套管材料。Incotoy 903与JBK-75是适于该用途的铁镍基超合金，而Incoloy 9XA是更适合ICCS套管用途的新低温合金。该类合金的另一用途是制作超导电机的转子，它要求材料在室温与液氦温度下都具有高强度高韧性。适用的材料为Incone1706及Incone1718铁镍基超合金，Incone1706的综合性能更好些，Incone1718合金还适用于液氧、液氢等低温压力容器。
CAS号：
性质：适于深冷条件使用的沉淀强化型铁镍基奥氏体超合金。这类合金在常温及低温下都具有高强度及好的塑性，其主要用途是制作内冷缆式超导体(ICCS)的套管材料。Incotoy 903与JBK-75是适于该用途的铁镍基超合金，而Incoloy 9XA是更适合ICCS套管用途的新低温合金。该类合金的另一用途是制作超导电机的转子，它要求材料在室温与液氦温度下都具有高强度高韧性。适用的材料为Incone1706及Incone1718铁镍基超合金，Incone1706的综合性能更好些，Incone1718合金还适用于液氧、液氢等低温压力容器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条