1) PVC produced by suspension method
悬浮法PVC
1.
Research on improving the heat stability of PVC produced by suspension method;
提高悬浮法PVC热稳定性的研究
3) PVC suspension dispersant
PVC悬浮分散剂
4) aqueous suspension
水悬浮法
1.
In this article, the process of snitched continuous glass fiber mat reinforced PVC composites by aqueous suspension is studied.
介绍了水悬浮法制备连续玻璃纤维针刺毡增强PVC复合材料(PVC/GMT)的成型工艺。
2.
The compatibility of macromolecular binder in suspension solution and PVC resin in glass fiber/PVC composites prepared by aqueous suspension is studied by using DMA,DSC.
采用DMA、DSC、SEM等手段研究了水悬浮法制备的GF (玻璃纤维 ) /PVC (聚氯乙烯树脂 )复合材料中PVC与悬浮液高分子粘结剂的相容性 ,并探讨了其对复合材料性能的影响。
3.
In consideratioin of technical properties of GF/PVC composite materials prepared with aqueous suspension, a model interfacial design is carried out on fiber/matrix interfacial structures, and serial materials are prepared according to the design.
根据水悬浮法制备GF/PVC复合材料工艺的特点 ,对材料中的纤维 /基体的界面结构进行了模型界面设计 ,并根据设计方案制备系列材料 ,考察在材料制备中界面形成的机理及界面层结构与材料性能的关系。
5) suspension process
悬浮法
1.
Risk analysis of polyvinyl chloride production in suspension process and safety measures;
悬浮法氯乙烯聚合工艺的风险分析及安全技术
2.
Comparison of PVC production process and it's application between bulk process and suspension process;
本体法与悬浮法聚氯乙烯生产工艺和应用的比较
3.
Methods of(selecting) suitable antifoaming agents for suspension polymerization of PVC are analyzed as well as the influence of antifoaming agents on the properties of polyvinyl chloride resins produced by suspension process.
介绍了消泡剂消泡的机理和类型,分析了悬浮法聚氯乙烯生产中如何选择适宜的消泡剂,以及使用消泡剂后对悬浮法聚氯乙烯树脂质量的影响。
6) suspension
[英][sə'spenʃn] [美][sə'spɛnʃən]
悬浮法
1.
Interphase and its formational mechanism of GF/PVC composite prepared by aqueous suspension impregnation;
水悬浮法制备GF/PVC复合材料的界面形态和形成机理
2.
In the present study,isotropic petroleum pitches with high softening point were used as material which were blended with 20wt%～50wt% naphthalene,and its particles was conglobated by a novel suspension procedure under the condition of normal pressure and the temperature lower than 100℃ The obtained pitch spheres were found to have good sphericity and narrow granu.
本实验以各相同性高软化点石油沥青为主要原料 ,通过加入 2 0 wt%～ 5 0 wt%的减粘剂进行调制 ,获得的调制沥青 ,破碎后选取一定粒径范围的沥青微粒 ,在常压和低于 1 0 0℃的温和条件下采用新颖的悬浮法实现了沥青的球化。
补充资料：微悬浮法聚氯乙烯
分子式：
CAS号：
性质：指用微悬浮法所制得的一种聚氯乙烯树脂。树脂颗粒分布比传统乳液法聚氯乙烯宽，而且平均粒径较大，可用以配制低黏度糊。此法工艺特点是氯乙烯单体借助于乳化剂和高剪切机械力(常用胶体磨，高速泵，均化泵)的作用在水中分散成如1μm左右液滴，采用油溶性引发剂引发聚合。它兼具乳液法和悬浮法的特点，胶乳粒径大小可调，生产稳定。用于配制聚氯乙烯糊，进行各种糊加工成型。
CAS号：
性质：指用微悬浮法所制得的一种聚氯乙烯树脂。树脂颗粒分布比传统乳液法聚氯乙烯宽，而且平均粒径较大，可用以配制低黏度糊。此法工艺特点是氯乙烯单体借助于乳化剂和高剪切机械力(常用胶体磨，高速泵，均化泵)的作用在水中分散成如1μm左右液滴，采用油溶性引发剂引发聚合。它兼具乳液法和悬浮法的特点，胶乳粒径大小可调，生产稳定。用于配制聚氯乙烯糊，进行各种糊加工成型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条