1) water phase suspension
水相悬浮法
1.
Techno economic evaluation on production of chlorinated paraffin 70 through water phase suspension;
水相悬浮法制氯化石蜡-70技术经济评价
2.
The economic analysis on 1000 t/a chlorinated paraffin70 production by water phase suspension, especially uncertainty analysis, is undertaken and the risk factors are indicated.
概述了氯化石蜡－７０产品的用途、市场需求及生产方法，对１０００ｔ／ａ水相悬浮法氯化石蜡－７０生产作了经济分析，重点作了不确定性分析，找出了风险因素，并提出相应的措施与建议。
3.
Based on discussiln on reaction mechanism of chlorinating polyvinyl chloride(CPVC) by water phase suspension process and characterization of CPVC samples,differences in production technology of CPVC at home and abroad were analyzed.
通过探讨水相悬浮法氯化PVC的反应机制和表征CPVC样品,分析了国内外CPVC生产技术差距,指出专用PVC的聚合工艺是影响CPVC质量的关键因素,提高PVC及CPVC树脂的分析表征手段是CPVC发展的重点。
2) aqueous suspension
水相悬浮法
1.
Kinetics of chlorinated trans-1,4-polyisoprene by aqueous suspension method;
水相悬浮法氯化反式-1,4-聚异戊二烯的反应动力学
2.
The process of aqueous suspension was used in modification of trans-1,4-polyisoprene through chlorination at ambient pressure.
采用水相悬浮法,在常压下对反式-1,4-聚异戊二烯(TPI)进行氯化改性。
3.
High isotactic polybutene-1(i-PB-1) was chlorinated by aqueous suspensionmethod.
本文第一章研究了水相悬浮法氯化高全同聚丁烯-1(i-PB-1)，考察了i-PB-1自身特性、工艺条件及添加剂对i-PB-1氯化程度的影响：研究了氯化高全同聚丁烯-1(CPB-1)的动力学及其内部结构；对CPB-1的溶解性以及热稳定性也进行了探索。
3) aqueous-phase suspension chlorination method
水相悬浮氯化法
1.
Why the color of chlorinated paraffin-70 produced by aqueous-phase suspension chlorination method is dark is analyzed from the aspects of the raw materials and the production process including the procedures of chlorination,neutralization,water-washing and drying.
从原料、生产过程(主要包括氯化、中和、水洗、干燥)等方面分析了水相悬浮氯化法生产的氯化石蜡-70产品色泽深的原因。
4) Aqueous suspension
水相悬浮
1.
Production of Chlorinated PVC resins by aqueous suspension method;
水相悬浮法生产氯化聚氯乙烯树脂
2.
The control steps of the thermal chlorination of isotatic polypropylene in aqueous suspension were studied.
研究了等规聚丙烯水相悬浮热氯化过程的控制步骤,认为随着氯化的进行,氯化过程从表面反应控制逐渐转向灰层扩散控制,并且灰层扩散控制对整个过程起主导作用。
3.
This paper was devoted to the chlorination of IPP by aqueous suspension process, which was simple and produced little pollution.
针对聚丙烯(PP)粘合性差、纤维较难染色、低温呈脆性、收缩率大等缺陷，本文采用工艺简单、污染较少的水相悬浮法对等规聚丙烯(IPP)进行氯化改性，探讨氯化机理并建立动力学模型，研究氯化工艺规律，为工业制备氯化等规聚丙烯(CIPP)树脂打下基础。
5) water-phase suspension phase-transfer method
水相悬浮相转移法
1.
Production process of chlorinated paraffin-70 by water-phase suspension phase-transfer method
水相悬浮相转移法氯化石蜡-70生产工艺
6) aqueous suspension
水悬浮法
1.
In this article, the process of snitched continuous glass fiber mat reinforced PVC composites by aqueous suspension is studied.
介绍了水悬浮法制备连续玻璃纤维针刺毡增强PVC复合材料(PVC/GMT)的成型工艺。
2.
The compatibility of macromolecular binder in suspension solution and PVC resin in glass fiber/PVC composites prepared by aqueous suspension is studied by using DMA,DSC.
采用DMA、DSC、SEM等手段研究了水悬浮法制备的GF (玻璃纤维 ) /PVC (聚氯乙烯树脂 )复合材料中PVC与悬浮液高分子粘结剂的相容性 ,并探讨了其对复合材料性能的影响。
3.
In consideratioin of technical properties of GF/PVC composite materials prepared with aqueous suspension, a model interfacial design is carried out on fiber/matrix interfacial structures, and serial materials are prepared according to the design.
根据水悬浮法制备GF/PVC复合材料工艺的特点 ,对材料中的纤维 /基体的界面结构进行了模型界面设计 ,并根据设计方案制备系列材料 ,考察在材料制备中界面形成的机理及界面层结构与材料性能的关系。
补充资料：反相悬浮聚合
分子式：
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
CAS号：
性质： 分散相是水相，连续相是油相，水溶性单体液滴悬浮在油相中进行的聚合。聚合发生在液滴中，类似于溶液聚合。如丙烯酰胺的反相悬浮聚合，以甲苯为油相，偶氮二异丁腈为引发剂，丙烯酰胺水溶液组成单体液滴分散在甲苯中，分散剂为滑石粉或磷酸钙等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条