1) high-performance polyethylene perchloride resin
高性能高氯化聚乙烯树脂
2) high chlorinated polyethylene resin
高氯化聚乙烯树脂
1.
One-pack epoxy-acrylate resin modified high chlorinated polyethylene anti-corrosive paint is prepared with high chlorinated polyethylene resin and epoxy-acrylate resin as the main binder,and anti-corrosive pigments.
以高氯化聚乙烯树脂和环氧丙烯酸树脂为主要成膜物质,添加防腐颜填料,制得单组分、附着力好、防腐性和耐候性优异的环氧丙烯酸树脂改性高氯化聚乙烯防腐涂料。
3) HPE
高性能高氯化聚乙烯
1.
Two kinds of systems heavy-duty coatings which can film at low-temperature (-10℃～-20℃)were invented with CR resin and HPE resin as Basic Materia, and Iron Oxide、Talc Powder、Titanium Dioxide、Bentonite as pigment, and adding DBP and Tung oil as additives.
本文分别以氯化橡胶、高性能高氯化聚乙烯树脂为基料,同时选用了钛白粉、膨润土、氧化铁红、滑石粉作为填料,在添加邻苯二甲酸二丁酯和桐油作为助剂条件下,制备了两种体系的能在低温(-10℃～-20℃)成膜的高性能的重防腐蚀涂层。
4) high molecular weight poly(vinyl chloride)
高分子量聚氯乙烯树脂
1.
The Brabander torque-rheometer with proprammable elevating temperature was used to study and compare the melting processes of two high molecular weight poly(vinyl chloride) resins(each having same molecular weight) and their plasticized systems in same shear stress.
采用程序升温Ｂｒａｂａｎｄｅｒ转矩－流变仪研究、比较了两种高分子量聚氯乙烯树脂（分子量相同）及其增塑体系在相同剪切应力作用下的熔融过程。
5) functionalized PVC resin
功能化聚氯乙烯树脂
1.
A novel adsorption material functionalized PVC resin containing N,O and S was synthesized by a series of reactions between PVC,diethylenetriamine,CS2 and ClCH2COOH.
以聚氯乙烯为原料,依次与二乙烯三胺、二硫化碳和氯乙酸反应,合成了含氮、氧、硫配位原子的功能化聚氯乙烯树脂,探讨了该树脂在不同的吸附时间、Cu2+浓度、pH值、温度等条件下对Cu2+的吸附行为。
6) polyvinyl chloride-ferric chloride resin
聚氯乙烯三氯化铁树脂
1.
The preparation method and application as catalyst in the esterification, ester exchange reaction, acetalation (ketalation) and molecular rearrangement reaction of polyvinyl chloride-ferric chloride resin was introduction.
介绍了聚氯乙烯三氯化铁树脂的制备方法和作为催化剂在酯化作用、酯交换作用、缩醛(酮)化作用及分子重排等方面的应用,说明了反应历程。
补充资料：高氯化聚乙烯
高氯化聚乙烯是高含氯量氯化聚乙烯，又称HCPE树脂。白色轻质小颗粒，相对密度1．35-1. 45，表现密度0．4-0．5，氯含量＞61％，热分解温度＞130℃ ,热稳定时间180℃＞3mm。由于分子结构中不含双键，氯原子又是无规分布，因此具有良好的耐候性、耐臭氧性、耐热老化性、耐燃性、耐化学药品性和耐油性。
用于代替氯化橡胶制造胶粘剂。也可用作胶粘剂的改性剂，可以提高粘接性、防腐蚀、阻燃性、耐磨件。贮存于阴凉、通风燥的库房内，防潮。
用于代替氯化橡胶制造胶粘剂。也可用作胶粘剂的改性剂，可以提高粘接性、防腐蚀、阻燃性、耐磨件。贮存于阴凉、通风燥的库房内，防潮。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条