1) high chlorinated polyethylene
高氯化聚乙烯
1.
This paper introduces the preparation of high-densification heavy-duty high chlorinated polyethylene anticorrosion coatings through modifying the raw materials ratio, pigment and filler selection and technology process.
从原料配比、颜填料选择和工艺过程等方面进行了改进,制备高致密化的重防腐高氯化聚乙烯涂层。
2.
The structure of high chlorinated polyethylene (HCPE) used for coating was characterized by differential scanning calorimetry,Fourier transform infrared spectroscopy (FTIR) and nuclear resonance hydrogen spectrum (~1H-NMR).
研究了固相法涂料用高氯化聚乙烯(HCPE)的结构：以差示扫描量热法表征聚集态结构,以傅里叶变换红外光谱(FTIR)和核磁共振氢谱(~1H-NMR)表征链结构。
3.
The thermal aging behavior of high chlorinated polyethylene(HCPE)heated at 160 ℃ hot air was studied by fourier transform infrared spectroscopy(FTIR).
用傅立叶转换红外光谱(FTIR)差谱法研究了高氯化聚乙烯(HCPE)的热老化降解机理,表征了高氯化聚乙烯在160℃热空气老化过程中分子结构的动态变化。
2) HCPE
高氯化聚乙烯
1.
The advances of highly chlorinated polyethylene (HCPE) are summarized.
叙述了高氯化聚乙烯(HCPE)的研究进展,介绍了HCPE常见的合成方法、常用的改性添加剂和改性方法,阐述了各添加剂在改性HCPE时的作用,分析了HCPE的应用领域及其在应用中存在的问题和解决方法。
2.
HCPE based anti-corrosive paint with good adhesion, excellent anti-corrosion and cost effectiveness is successfully developed by using HCPE as main film former and toluene resin as modifier.
采用成本低而性能好的高氯化聚乙烯(HCPE)作为主要成膜物质,通过二甲苯树脂等改性,研制成功附着力好、防腐性能优异、性价比好的HCPE防腐涂料。
3.
Polyethylene(PE)is blended with chloropolyethylene(CPE)and high chloropolyethylene(HCPE) respectively.
分别选择了氯化聚乙烯弹性体和高氯化聚乙烯与聚乙烯共混，利用Ｂｒａｂｅｎｄｅｒ对共混物的相容性作了分析，对聚乙烯与氯化聚乙烯的共混比与性能的关系进行了探讨，利用红外光谱对氯化聚乙烯的结构进行了分析，得出了氯化聚乙烯弹性体和高氯化聚乙烯的适宜用量。
3) higher chlorinated polyethylene
高氯化聚乙烯
1.
By modification of higher chlorinated polyethylene, the fire retardant, decorative coatings with good fire retardant.
通过对高氯化聚乙烯的改性 ,研制成防火性能优良的E5 2 -10饰面膨胀型防火涂料 ,详细介绍了原理、配方、性
2.
The preparation of higher chlorinated polyethylene(HCPE) for coatings in solid phase and its application in corrosion protective coatings has been described.
研究了固相法涂料用高氯化聚乙烯树脂的制备及其在防腐涂料中的应用。
4) high chlorinated polyethylene(HCPE)
高氯化聚乙烯(HCPE)
5) HCPE
高氯含量氯化聚乙烯
1.
Study on the Solid Phase Polymerization Process of HCPE Used in Coating;
固相法合成涂料用高氯含量氯化聚乙烯
6) high chloropolyethylene
高氯聚乙烯
1.
A PC(polyester epoxy) modified HCPE(high chloropolyethylene) corrosion protective coatings by blending of PC and HCPE has been developed, which could be used as an alternative of chlorosulphonated polyethylene(CSM) corrosion protective coatings.
采用酯化型环氧树脂（ＰＣ）与高氯聚乙烯（ＨＣＰＥ）共混，制得ＰＣ改性ＨＣＰＥ防腐蚀涂料，可作为氯磺化聚乙烯（ＣＳＭ）防腐蚀涂料的替代品种。
补充资料：高氯化聚乙烯
高氯化聚乙烯是高含氯量氯化聚乙烯，又称HCPE树脂。白色轻质小颗粒，相对密度1．35-1. 45，表现密度0．4-0．5，氯含量＞61％，热分解温度＞130℃ ,热稳定时间180℃＞3mm。由于分子结构中不含双键，氯原子又是无规分布，因此具有良好的耐候性、耐臭氧性、耐热老化性、耐燃性、耐化学药品性和耐油性。
用于代替氯化橡胶制造胶粘剂。也可用作胶粘剂的改性剂，可以提高粘接性、防腐蚀、阻燃性、耐磨件。贮存于阴凉、通风燥的库房内，防潮。
用于代替氯化橡胶制造胶粘剂。也可用作胶粘剂的改性剂，可以提高粘接性、防腐蚀、阻燃性、耐磨件。贮存于阴凉、通风燥的库房内，防潮。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条