1)  epoxy primer
环氧底涂层
1.
The results showed that epoxy primer and high-chloride primer have certain water resistance;alkyd primer has poor water resistance;zinc-rich primer has cathodic protection effect and better water resistance;Organic coating has better corrosion resistance in the Salt Lake water medium.
选择了5种常用的防腐底涂层,通过性能测试和在水环境中的耐蚀性,研究了它们的防护性能,结果表明:环氧底涂层和高氯化底涂层有一定的耐水性,醇酸底涂层耐水性较差,富锌涂层具有阴极保护效果,耐水性较好;在盐湖水介质中有机涂层耐蚀性较好。
2)  epoxy resin
环氧
1.
Effect of Polyether on Preparation of Epoxy Resin-PU IPN;
聚醚对环氧-聚氨酯互穿网络制备的影响
2.
The title oil resistant coatings for fuel tanks has been developed by choosing proper polyester resin,epoxy resin and appropriate polyisocanate hardener,The results indicated that the coatings shows good low temperature drying property and corrosion protection, oil-resistance,particularly hot-oil-resistance.
通过选择适当的聚酯树脂和环氧树脂,配以适当的异氰酸固化剂,研制了一种用于油箱的环氧聚氨酯耐油涂料。
3.
In this paper, the application and development of epoxy resins act as the inhibitor of rocket propellant are reviewed; the recent progress of work is also introduced.
综述了环氧包覆材料的历史发展和国内外现状 ,根据环氧树脂增韧改性的进展 ,提出了环氧包覆材料的发展方向。
3)  epoxy
环氧
1.
Research development of waterborne curing agent for epoxy resin;
水性环氧固化剂的研究进展
2.
The self assembly at carbon fiber/epoxy interface in composites;
碳纤维增强环氧复合材料的界面自组装
3.
Preparation and optical properties of ZnO/epoxy nanocomposites;
氧化锌/环氧纳米复合材料的制备及其光学性能研究
4)  oxido-
(环)氧
5)  epoxide resin
环氧树脂
1.
Organic-inorganic hybrid composites were prepared by the sol-gel method for the wear-resistant coating on epoxide resin and TEOS,KH-560,KH-570 were used as starting materials.
以正硅酸乙脂、KH-560、KH-570为先驱体,采用溶胶-凝胶法结合旋转涂敷法在环氧树脂基体上制备了有机硅耐磨涂层。
2.
A new woodceramics was fabricated from wood powder and epoxide resin.
以香杉木粉和环氧树脂为原料制备了木材陶瓷,利用TGA对木粉、环氧树脂的热分解过程进行了研究,通过扫描电镜、X射线衍射技术对木材陶瓷的微观结构和物相进行表征,研究了碳化温度对木材陶瓷得碳率、体积收缩率、耐磨性的影响。
3.
The aqueous polyurethane modified by epoxide resin(WPUE) was prepared with trimethylolpropane(TMP) as cross linker, then epoxide-acrylate-polyurethane(WPUEA) hybrid dispersions were synthesized by free-radical emulsion polymerization which were carried out by using azodiisobutyronitrile (AIBN) as initiator and methyl methacrylate (MMA) as monomer.
以三羟甲基丙烷(TMP)为交联剂,先用环氧树脂改性聚氨酯(PU),得到环氧树脂改性的水性聚氨酯(WPUE)分散体,然后加入甲基丙烯酸甲酯(MMA)和引发剂偶氮二异丁腈(AIBN),通过自由基乳液聚合得到聚氨酯-环氧树脂-丙烯酸酯(WPUEA)杂合分散体,并通过傅里叶红外光谱、凝胶渗透色谱、粒径分析仪和透射电镜对其进行了表征。
6)  epoxy
环氧树脂
1.
Study on the curing process of benzoxazine-epoxy copolymerization;
苯并口恶嗪/环氧树脂共聚固化过程研究
2.
Effect of Nano-SiO_2 on Properties of PP/Epoxy Blends;
纳米SiO_2对聚丙烯/环氧树脂共混物性能的影响
3.
Synthesis and Low Surface Energy Property of New Polyblends of Amino(polysiloxane)-polyurethane-epoxy and PTFE;
聚四氟乙烯、有机硅复合改性聚氨酯/环氧树脂共混聚合物的合成及其低表面能特性
参考词条
补充资料:双(2,3-环氧环戊基)醚玻璃布层合板
分子式:
CAS号:

性质:以双(2,3-环氧环戊基)醚为基料的层合板。马丁耐热270℃。拉伸强度371MPa。弯曲强度487MPa。冲击强度125kJ/m2。体积电阻率l.18×1015Ω·cm。将双(2,3-环氧环戊基)醚与固化剂等制成胶液或B阶树脂后,充分浸渍玻璃布,再叠层并层合即得。主要用作航空航天器材、电子元件和体育器材等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。