1) hydrogen content
置氢量
1.
With increasing hydrogen content, the density of the TC4 titanium sintered body gradually increases.
结果表明:随着置氢量的增加,置氢TC4合金粉末模压成形烧结体致密度基本呈现逐渐增高趋势,模压成形烧结体由魏氏体组织向双态的过渡状组织转化,模压成形烧结体退火后组织较退火前发生了明显的破碎和细化;烧结体退火后压缩屈服强度基本呈逐渐增大趋势,且烧结体真空退火后氢含量可达到安全状态,其中,置氢量0。
2.
The results show that the hydrogenated TC21 alloy powder with different hydrogen content possess irregular morphologies,and which are composed of bright α phase and dark β phase and exhibit lamellar structure,α/β cluster and basket structure.
随置氢量的增加,置氢TC21粉末显微硬度呈降低趋势;α相逐渐减少,β相逐渐增多,并且有少量的α″相生成;粉末的压缩性能呈先变差后变好的不明显变化趋势,成形性能先变差又逐渐变好,置氢量0。
2) hydrogen measuring device
氢气测量装置
3) semi-micro hydrogenation apparatus
半微量加氢装置
4) hydrogenation
[,haidrədʒə'neiʃən]
置氢
1.
Effect of holding time on high temperature microstructures of hydrogenation TC4 alloy before superplastic deformation;
保温时间对置氢钛合金超塑变形组织的影响
2.
Influences of hydrogenation on room temperature microstructure of Ti6Al4V alloy;
置氢对Ti6Al4V合金室温组织的影响
3.
Influence of hydrogenation on the physical and pressing properties of TC4 alloy powder;
置氢对TC4合金粉末物理性能和压制性能的影响
5) hydrogen
[英]['haɪdrədʒən] [美]['haɪdrədʒən]
置氢
1.
The thermal deformation performance of hydrogenated Ti600 titanium alloy was studied with thermal simulation.
采用热模拟实验方法,研究了Ti600钛合金置氢后的热塑性性能,确定了不同含氢量及工艺参数条件下的激活能。
2.
Friction stir welding was used in hydrogen titanium alloy of 2 mm thick.
首次对2 mm厚置氢TC4钛合金进行搅拌摩擦焊焊接开展了含氢量分别为0。
补充资料：量置
1.酌量安置。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条