2) extruding technology
挤压工艺
1.
The test and study respectively on the forward and backward extruding technology for deep-cup-typed component with flange on base were conducted.
对一种底部带凸缘的深杯形件的正、反挤压工艺分别进行了试验研究。
3) extrusion technology
挤压工艺
1.
An introduction was made on the hot-extrusion technology of the sliding oil cylinder of the speed-reducing device and on the die.
介绍了减速顶滑动油缸热挤压工艺及模具 ,分析了原工艺存在的问题 ,提出了采用热挤压工艺 ,反挤压与径向挤压复合 ,可同时挤出带盲孔的缸体和带法兰的缸顶 ,既省工时又节约材料 ,提高了经济效
2.
Soy protein isolate and potato starch were partially added to cold pressed soybean meal to develop high-moisture textured soy protein products by optimized extrusion technology and raw material system.
在冷榨豆粕中加入部分大豆分离蛋白和马铃薯淀粉,通过挤压工艺条件和原料体系的研究,开发高水分组织化大豆蛋白制品。
4) extrusion
[英][eks'tru:ʒən] [美][ɛk'struʒən]
挤压工艺
1.
In order to solve these problems,the broacher front flank extrusion process was designed.
拉刀在刃磨过程中存在获得定值前角难,且会降低刀具硬度等问题,为此设计了拉刀前刀面挤压工艺。
5) extrusion process
挤压工艺
1.
Based on the design concept and method of knowledge based engineering,the extrusion process and die intelligent design system was developed on the platform of UG/NX.
以UG/NX平台为支撑,结合基于知识的设计理念与方法,在开放性知识库、工艺特征模型技术、RCCR推理模式和DFV模具结构设计平台等关键技术的基础上,成功地完成基于知识的挤压工艺及模具设计系统的开发,并以具体实例说明该系统的工艺和模具设计过程。
2.
The factors which affect profile's surface quality are analysed from the aspects of raw material、extrusion process?dies and handling.
从原材料、挤压工艺、模具和搬运等几个方面详细分析了影响型材表面质量的因素 ,并提出了提高铝型材表 面质量的一些方法。
3.
Its composition and extrusion process and optimizing of heat treatment are determined by test.
研究了6005A T6铝合金大型材的技术要求,化学成分和挤压工艺、热处理工艺优化等问题。
6) cold extruding technology
冷挤压工艺
1.
After using the cold extruding technology, abained good effect.
采用冷挤压工艺取代传统的机械加工工艺,取得了较好的效果。
2.
the advantages of the titanium alloy hexagon locking-nuts with flange with cold extruding technology replacing hot extruding working method are introduced.
对钛合金六角法兰面自锁螺母进行了工艺分析、制订了冷挤压工艺路线、计算了毛坯尺寸及冷挤压力。
3.
The advantages of the reel internal gear with cold extruding technology replacing traditional metal cutting working method were narrated, and the technological for the reel internal gear was analyzed.
叙述了卷筒内齿轮用冷挤压工艺代替传统的金属切削加工方法的优点,并对卷筒内齿轮进行了工艺分析。
补充资料：非膨化挤压食品生产工艺设备
非膨化挤压食品生产工艺设备   | ||
|
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条