1) continuous casting slab
连铸铸坯
1.
The results showed that the massive non-metallic inclustions which existed in the continuous casting slab caused internal stress between the substrate and the inclustions.
结果表明:由于连铸铸坯内存在大量非金属夹杂物,导致基体与夹杂物之间产生内应力,因此在拉伸过程中促使裂纹的迅速扩展,形成穿晶裂纹和空洞,最终呈现伸长率偏低的结果。
2) continuous casting
连铸
1.
Improvement in second cooling control of slab continuous casting by data mining technology;
基于数据挖掘技术改进板坯连铸二冷控制
2.
Research on the mechanism of oscillation mark formation during continuous casting of steel;
连铸坯表面振痕形成机理的研究
3.
Research on the circulating cooling water treatment by using continuous casting crystallizer;
连铸结晶器循环水处理的研究
3) continuous cast
连铸
1.
To introduce the production process of lowcarbon wire rod for wire drawing with electrical furnace to smelt,withLF furnace to refine,with continuous cast to produce 120 mm×120 mm billet,with semi-continuous rolling mill to roll wirerod.
介绍采用电炉冶炼、LF炉精炼、连铸机生产120 mm×120 mm方坯,再用半连续式线材轧机生产拉拔用低碳线材的生产工艺。
2.
The method and results of the study on formation condition for internal crack in continuous casting slab were reviewed.
评述了连铸坯内裂纹形成条件的研究方法和结果。
4) Concasting
连铸
1.
Application of Mold Electromagnetic Stirring Technology for 280mm×380mm Concasting Bloom;
280 mm×380 mm连铸坯结晶器电磁搅拌技术的应用
2.
Production Practice of 150mm×150mm Concasting Billet of Steel ML08Al;
ML08Al钢150mm×150mm连铸坯的生产实践
3.
A Study on Distribution Characteristics of Electromagnetic Field in Concasting Mould for Round Bloom;
大圆坯连铸结晶器内电磁场分布特性的实验研究
5) CC
连铸
1.
CHARACTERISTIC OF CC MOULD POWDER AND ITS SELECTION;
连铸保护渣的特性及其选用
2.
Practice on CC-HCR production;
连铸坯热送热装的生产实践
6) casting
连铸
1.
Study on the solidification and temperature field in slab casting of stainless steel;
不锈钢板坯连铸温度场及凝固末端位置的研究
2.
Study on temperature field and solidification for stainless steel slab casting;
不锈钢板坯连铸过程中温度场及凝固的研究
3.
The measures on improving the cleanliness of molten steel, such as rational burden of EAF for temperature of steel tapping, enough holding time of refining, suitable top casting temperature, protective casting and perfecting the process control are put forth.
叙述了炼钢厂连铸圆坯中夹杂物的主要类型及产生的原因和危害性。
参考词条
补充资料：绍兴日铸茶
绍兴日铸茶
亦称日铸茶、日铸雪芽。产于绍兴会稽山麓王化乡的日铸岭。该茶制法改蒸为炒，改碾为揉，开创了中国绿茶生产的新途径，清代金武祥在《菜香之笔》中称之为“遂开千古茶饮之宗”。自宋代起列为贡品，至康熙巡游江南后，岁岁朝贡，极负盛名。
该茶经开水泡后，雪芽直竖，如兰似雪，故又称"兰雪"。日铸岭绍兴县东南，其地古木交荫，野竹丛生，接近岭巅处有上祝、下祝两村，为该茶产地。御茶湾在下祝村下，为著名产地之一。产区云雾缭绕，土质肥沃，年均气温16.5℃，年均降水量1418毫米，全年无霜期230天左右。茶树较他处低矮，萌芽期迟缓，一般于谷雨后采摘一芽一、二叶初展，经炒青精制，成品芽细而尖，白毫显露，兰花芳香，味甘而滋，气厚味永，经泡耐饮，汤色呈乳白，经5次冲泡，香味依然存在。
该茶在唐代陆羽著《茶经》中已被评为珍贵仙茗。北宋欧阳修称："两浙之茶，日铸第一"。至南宋成为贡品，并划地作为专供朝廷御用茶产地，称"御茶湾"。炒青制法约于此时开始。至明代，"兰雪"之名盛行京师，达官贵人，非"兰雪"不饮，于是形成其鼎盛时期。民国时期，制茶工艺失传。新中国成立后，于1988年恢复生产，并通过了市级鉴定。新中国成立后被列为中国名茶。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。