1) Fazuo(Dharma^sana)
法座
1.
Biographical Sketch of the Successive Fazuo(Dharma^sana)in Dalong Temple;
达龙寺历任法座事略(续)
2) sessile drop method
座滴法
1.
The wettability of molten nickel to solid polycrystalline α-alumina was investigated using sessile drop method.
采用座滴法观察了熔融Ni与固态多晶α型Al2O3间的润湿行为,测定了1773 K、1823 K和1873 K温度下的接触角,分析了接触角变化规律,评价了二者间的润湿性。
2.
The contact angles of molten Al alloys,Al-9%Si,Al-13%Si and Al-18%Si with SiC are measured by the sessile drop method in vacuum.
用座滴法测定了真空条件下Al－9％Si、Al－13％Si、Al－18％Si三种铝合金与SiC的润湿角。
3.
The wettability of TiB_2(C)by aluminium and cryolite-alumina was studied by the sessile drop method.
为了探讨工业应用TiB_2阴极材料的途径,本文采用由中温炭还原法制得的TiB_2原料,在配入一定量的石墨成分后,将其热压成TiB_2(C)片,用高温可见光座滴法和X射线座滴法分别研究了1000℃时,铝电解质及电解质熔盐覆盖下的铝液对此种含炭TiB_2热压片润湿性,测得了非极化条件下有熔盐存在时,铝在纯TiB_2热压片上的润湿角近乎零度,铝在TiB_2(C)上的润湿角为10°左右,并讨论了铝对TiB_2(C)试样片的润湿机理。
3) seat-joined flange
接座法兰
1.
The process improvement of seat- joined flange is introduced, and its punching process procedure and the key points in die design under the condition of lots manufacture are briefly analyzed.
介绍了接座法兰的工艺改进,简要分析了批量生产条件下其冲压工艺过程及模具设计要点,并阐述了机加工件改冲压件的优点、可行性、经济性等。
4) sessile drop technique
座滴法
1.
The contect angle of the aluminium alloy on fly ash was measured by improved sessile drop technique.
用改进的座滴法测量了铝合金在粉煤灰上的润湿角。
2.
The sessile drop technique is used to measure the contact angle between molten aluminum and graphite or copper coated graphite.
采用改进的座滴法分别测定了铝熔体与石墨、镀铜石墨的接触角。
3.
By the sessile drop technique, the wetting behaviors of Cu-Fe alloys on W matrixes in the vacuum and Ar atmosphere, and the effect of Fe addition on the bonding conditions of Cu/W interface were studied respectively.
采用座滴法研究在真空和Ar气气氛下,Cu-Fe合金在W基板上的润湿行为和Fe元素对Cu/W界面结合状态的影响。
补充资料：法座
【法座】
（杂语）禅林演法之座（即须弥座）谓之法座。法华经序品曰：“即于法座上跏趺坐三昧。”沈约文曰：“涂出玉门，法座非远。”
（杂语）禅林演法之座（即须弥座）谓之法座。法华经序品曰：“即于法座上跏趺坐三昧。”沈约文曰：“涂出玉门，法座非远。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条