1) approximate
逼近义
1.
This paper discusses the origin of the Chinese prefix “zhun” first, then picks out some characters of the structure of “zhun + X", and emphasizes that the prefix “zhun" has two meanings: one is in analogous to, the other is approximate.
本文从探讨“准+X”结构的特点入手,着重区分了“准”的两个语义类似义和逼近义。
2) approximate
逼近
1.
For NC process problem of the complicated space curve, the paper describs outline appearance of the part with quasi-uniform B-Spline by given point and approximates B-Spline curve with straight line, moreover, turns into NC process procedure of the part automatically.
对于复杂空间曲线的数控加工问题,通过给定型值点,反算构造三次准均匀B样条曲线,并用直线对B样条曲线进行了逼近处理,自动生成零件数控加工程序。
2.
Two neural networks were built to approximate the function of camera distortion.
提出了一种基于BP神经网络的修正成像误差的算法,建立两个神经网络分别对δu与δv进行最佳函数逼近。
3.
Rational number can approximate to real number,use the notation of Approximate one can prove Riemann function isn t differentiable anywhere,that the Rational points are dense in unit circle.
利用有理数对实数逼近的表示方式,给出黎曼函数处处不可导的一种证明,给出单位圆周上的有理点在单位圆上稠密的证明。
3) approach
逼近
1.
Computer simulated approaching method for motion analysis of planar 3-RRR parallel robots;
平面3-RRR并联机器人运动分析的计算机模拟逼近法
2.
A Way to Approach and Imitate the Motor Cam Valve.;
内燃机配气凸轮的逼近与仿制方法
4) approximation
逼近
1.
Least squares approximation for non-circular curve in NC machining;
数控加工中非圆曲线的最小二乘圆弧逼近
2.
Surface flexible reconstruction based on approximation in reverse engineering;
基于逼近理论的逆向工程曲面柔性重构技术研究
3.
Simultaneous approximation in l_p(X_k);
l_p(X_k)中的联合逼近
5) Approaching
逼近
1.
A new and fast algorithm of parameter approaching is pr oposed by analyzing the three methods of linear fitting based on residue rule.
对三种基于残差准则的直线拟合方法进行分析并提出了一种直线拟合快速实现的新算法——参数逼近法;算法以变步长对斜率和截距进行逼近,降低了利用计算机进行直线拟合的复杂度;算法不仅容易实现,收敛速度快,而且可以根据需要自由控制拟合精度;另外,算法对3种准则的拟合均适用,从而将3种直线拟合法统一于一个体系之下。
2.
The paper acquires the control vertex of 3-order NURBS from data points and presents an approaching method for NURBS curve by the least square circle,it bases on the matrix representation for NURBS curve.
在给定具体型值点的条件下 ,通过反求工程 ,构造出三次NURBS曲线的参数方程 ,并提出了一种利用最小二乘圆对NURBS曲线进行分段圆弧逼近的数控编程方法 ,它基于NURBS曲线的矩阵表示 ,在满足精度的要求下 ,可使拟合圆弧段数最少 ,并能够减小拟合误差、简化数值计算和编程 ,从而减少CAD系统与CNC系统的数据传送 ,提高了加工效率和质
3.
On the level of translating,it considers the translated text and the original text as two curves infinitely approaching each other and seeking the optimal correspondence.
在Translating层次上,译文和原文可近似看成通过寻求最对应点而达到不断逼近效果的两条曲线。
6) approximations
逼近
1.
The four equivalent conditions for approximations are obtained by means of Laplace transformations.
m次积分余弦算子函数是近年来提出并研究的一类算子族,它的逼近问题是研究的课题之一。
参考词条
补充资料：二义──阿赖耶二义
【二义──阿赖耶二义】
﹝出宗镜录﹞
梵语阿赖耶，华言藏。谓第八识能含藏诸法种故。
［一、能摄一切法］，摄谓摄持，即含藏之义。盖此识摄持一切善恶之法，犹如库藏，含藏宝贝而不遗失也。
［二、能生一切法］，生即发生也。谓此识既含藏善恶种子，则一切善恶诸法，从此出生，犹如大地，能发生草木万物也。
﹝出宗镜录﹞
梵语阿赖耶，华言藏。谓第八识能含藏诸法种故。
［一、能摄一切法］，摄谓摄持，即含藏之义。盖此识摄持一切善恶之法，犹如库藏，含藏宝贝而不遗失也。
［二、能生一切法］，生即发生也。谓此识既含藏善恶种子，则一切善恶诸法，从此出生，犹如大地，能发生草木万物也。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。