说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 最小流量调节阀
1)  minimum flow regulating valve
最小流量调节阀
1.
To study the flow characteristics of minimum flow regulating valve,a labyrinth channel in the valve is divided into two parts-the series and the parallel type channels.
将迷宫式最小流量调节阀的流道分解为串联型和并联型流道,首先对其节流降压特性分别进行模型试验,分析流体在流道中的压力分布特性,然后根据压力分布特性,对串联型流道进行优化设计和试验,最后通过模型试验,研究了两种流道的阻力特性。
2)  minimum flow valve
最小流量阀
1.
The realization of feed water pump outlet minimum flow valve control in DCS of the first term project in Ningxia Daba Power Generation Co.,Ltd
宁夏大坝发电有限责任公司I期给水泵出口最小流量阀控制在DCS中的实现
3)  cyclic type regulating valve
流量调节阀
1.
Numerical simulation of optimum design of large diameter cyclic type regulating valve;
大口径环喷式流量调节阀数值模拟优化
4)  flow regulating valve
流量调节阀
1.
And the flow regulating valve with multi-orifice and inundated jacket used in the joint section of YRDP for the first time in China can regulate and control the flow and pressure of waterline flexibly, which provides convenience for the automatized dispatching and controlling along the whole waterline in joint section of YRDP.
对于高中水头、长距离、大直径的有压输水管道,其压力和流量调节、控制是较难解决的问题,引黄联接段工程在国内首次运用多喷孔淹没套筒式流量调节阀,能更灵活机动地调节、控制输水管道的流量和压力,为引黄工程联接段全线自动化调度管理提供了方便。
2.
This paper uses single-chip computer and feedback measuring device and combines step motor to adjust the flow regulating valve precisely.
利用单片机和反馈检测元件,结合步进电机来精确调节流量调节阀,组成一基于步进数字式的闭环控制的流量控制系统。
5)  flow control valve
流量调节阀
1.
The use of flow control valves in the branch line of relay stations of long-distance gas pipeline can effectively regulate gas flow so as to protect relevant process equipment.
在天然气长输管线分输站调压计量支路中增加流量调节阀,利用流量调节阀进行流量控制,可以有效地实现气量调配、保护相关工艺设备、抑制喘流等工艺要求,并能缓解峰谷差对分输站的压力,这种做法在实践中取得了较好的应用效果。
6)  the minimum adjustment quantity
最小调节量
1.
This paper puts forward a control method which uses a whole cycle wave as the minimum adjustment quantity and distributes the wave uniformly to realize the temperature increase linearly.
本文提出了一种全周波为最小调节量且分布均匀的控制电炉加热线性升温的波序控制方法。
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条