1) discrete three dimensional finite element model
三维分离式有限元模型
2) three dimensional finite element model
三维有限元模型
1.
Objective:To construct a three dimensional finite element model for edentulous maxilla restored with dental implant and affachment.
目的:建立上颌无牙颌种植体义齿与附着体联合修复的三维有限元模型,为其生物力学分析提供数学模型基础。
2.
Results: A three dimensional finite element model of calcaneus and talus was established.
目的 :建立跟、距骨骨性结构的三维有限元模型 ,对其在不同步态过程中的应力分布进行分析。
3.
Objective To establish a three dimensional finite element model of proximal femur of normal person as a foundation of finite element analysis in this area.
目的 建立正常人体股骨上段三维有限元模型 ,作为今后该部位进一步有限元分析的基础。
3) Three-dimensional finite element model
三维有限元模型
1.
Construction of three-dimensional finite element model of human hip joint and its biomechanical significance;
人体髋关节三维有限元模型的建立及其生物力学意义
2.
Construction of three-dimensional finite element models of maxillary dentition and MBT straight wire appliance;
上颌牙列及MBT直丝弓矫治器三维有限元模型的建立
3.
Establishment of three-dimensional finite element model of mandibular dentition and mandible with incorporated appliances;
含矫治器的下牙列及下颌骨三维有限元模型的建立
4) 3-D finite element model
三维有限元模型
1.
3-D finite element model of lower teeth,periodontium and reverse-curve arch wires;
摇椅弓及牙列和牙周组织三维有限元模型的建立
2.
Results: Successfully construct the 3-D finite element model.
结果:成功地建立了三维有限元模型。
6) 3D finite element model
三维有限元模型
1.
In order to build a new knockdown 3D finite element model of total cervical spine,to evaluate the finite element analysis ability of the model under physiological load vectors,the CT images were pretreated in the MIMICS software,and the data were imported ABAQUS software for 3D-reconstruction.
建立组合式的完整颈椎段三维有限元模型,进行生物力学分析。
2.
A 3D finite element model for the CRC-AC composite pavement is established, and it is confirmed through analysis that the middle part of the transverse crack in CRCP is the critical position to fatigue loss.
建立CRC-AC复合式路面三维有限元模型,分析确定了横向裂缝中部是CRCP疲劳损耗临界荷位。
3.
3D finite element models of belled pier in the homogeneous stratum with different elastic modulus of soils,angle of internal friction and cohesion force.
为了分析不同土体参数对扩底墩竖向承载性状的影响,利用有限单元法,建立了均匀地基中不同土体模量、内摩擦角、粘聚力的三维有限元模型,模拟分析了土体模量、内摩擦角和粘聚力变化时扩底墩的竖向承载性状。
补充资料：分离式分离机
分子式：
分子量：
CAS号：
性质：又称分离机。根据操作原理分类的一类离心机。用以分离更小固体颗粒（小于5微米）的不同浓度的场合和分离乳浊液和细粒子悬浮液。常用的有管式高速离心机、室式分离机、碟式分离机等。
分子量：
CAS号：
性质：又称分离机。根据操作原理分类的一类离心机。用以分离更小固体颗粒（小于5微米）的不同浓度的场合和分离乳浊液和细粒子悬浮液。常用的有管式高速离心机、室式分离机、碟式分离机等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条