1) Fault deformation rate
断层形变速率
2) fault deformation
断层形变
1.
Study of trend variation of fault deformation——ertical deformation trend accumulation rate D_c;
断层形变趋势变化研究——垂直形变趋势累积率D_c值
2.
Anomalous change of fault deformation before Wenchuan M_S8.0 earthquake and its comparison with response of other large earthquakes
汶川8.0级地震前断层形变异常及与其它大震的比较
3.
The technique for automatic measurement of fault deformation is of advantage to inves.
跨断层形变自动化观测技术为断层现今活动性研究、地震监测预报和工程安全评估提供了有利条件。
3) transformational faulting
变形断层
4) strain rate
变形速率
1.
The strain-stress curves were measured using Gleeble 3800 thermal mechanical simulator at strain rates of 0.
采用Gleeble 3800型热模拟试验机测定了含磷高强无间隙原子钢(IF钢)在变形温度为950,850℃,单道压缩变形量为50%,变形速率为0。
2.
The relationship between volume fraction of ultra-fine grained ferrite and strain rate was investigated for a plain low carbon steel (type Q235).
针对普通碳素钢(Q235类型),研究在Ae3~Ar3温度区间内采用形变诱导铁素体机制获得超细晶铁素体的数量与变形速率的相互关系。
3.
The influences of different technology parameters,such as temperature,strain,strain rate,on deformation resistance and microstructure of Q235 steel were investigated by Gleeble-1500 machine,which provided references for production practice.
借助Gleeble-1500热模拟机,研究了Q235钢不同温度、不同变形量及不同变形速率等参数对变形抗力及组织的影响规律,为生产实践提供了参考。
5) deformation rate
变形速率
1.
The influence of different deformation temperature and different deformation rate on SUS316L stainless steel flow and mircostructure
不同变形温度和变形速率对SUS316L不锈钢流变应力及金相组织的影响
2.
The deformation temperature and the deformation rate are the mai.
变形温度和变形速率是影响动态再结晶的主要因素,一般在高的变形温度和小的变形速率下,动态再结晶才能发生。
3.
And the variation of deformation rate of plasticized material was also simulated.
计算并分析了惯性摩擦焊接过程中接头塑性区的分布、扩展规律及其与工件轴向缩短的关系,并计算了塑性区金属塑性变形速率的分布和变化情况。
6) burn off rate
变形速率
1.
The effect of the burn off rate on the structure and mechanical properties in the friction welded joint of low alloy constructional steel 35CrMo is studied in this paper.
研究了变形速率对低合金结构钢 3 5CrMo磨擦焊接头组织与力学性能的影响 。
2.
The effect of the burn off rate on the structure and mechanical properties of friction welded joints made of low alloy constructional steel has been studied.
研究了变形速率对低合金结构钢摩擦焊接头组织与力学性能的影响。
补充资料：X线断层照片
X线断层照片
参见"X线 体层摄影"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条