1) shear strain/transversal shear strain
剪应变/横向剪应变
2) transverse shearing strain
横向剪切应变
1.
The nonlinear equation includes two nonlinear terms caused by finite deformation and double geometric dispersion effects caused by transverse inertia and transverse shearing strain.
在同时引入横向惯性和横向剪切应变的情况下,导出了有限变形弹性圆杆的非线性纵向波动方程,方程中包含了二次和三次的非线性项以及由横向剪切与横向惯性导致的两种几何弥散效应。
3) transverse shear stress
横向剪应力
1.
Based on the Reissner-Mindlin type global displacement field and predictor-corrector method, the transverse shear stresses are investigated for laminated composite plates subjected to thermal load.
基于Reissner-Mindlin型全局位移场模型和有限元预测-修正分析过程,数值计算和分析了复 合材料层合板受热载荷作用下的横向剪应力。
2.
Based on the Reissner Mindlin type global displacement field and predictor corrector method, the deflections and transverse shear stresses were investigated for laminated composite cylindrical shells under mechanical load.
本文根据ReissnerMindlin型的全局位移场(一阶和三阶),应用有限元预测—修正法,数值计算和分析了机械载荷作用下复合材料层合圆柱壳的挠度和横向剪应力。
3.
Secondly, by mean of 3-D stress equilibrium equations and Lagrange's interpolation, the least-square fit was adopted to determine the transverse shear stress.
首先按照一般的有限元分析过程(没有引入剪切修正系数)计算出全局响应(如挠度,频率和屈曲载荷等)的预测值;然后利用Lagrange插值构造横向剪应力的一般形式,使得满足层间连续和表面上为零的条件,通过最小二乘法拟合三维应力平衡方程获得横向剪应力;最后在单元上计算和引入剪切修正系数,再经过有限元分析计算出全局响应的修正值。
4) shear strain
剪切应变
1.
Microstructure transformation of ultrafine eutectoid lamellar under deformation of shear strain;
剪切应变模式下超细共析片层组织演变研究
2.
Shear strain in MBE grown CdTe films on Si(211) substrates;
在Si(211)衬底上分子束外延CdTe的剪切应变
3.
The model of plastic shear strain gradient on size effect in uniaxial compression of rock specimen;
岩石试件尺寸效应的塑性剪切应变梯度模型
5) shear strain
剪应变
1.
Effects on maximum shear strain of soil layer surface of vertical seismic motion;
竖向地震动对地表最大剪应变的影响
2.
The results show that dynamic recrystallization of austenite in the zone of largest effective plastic strain doesn't be most complete,while shear strain has more strong effect on dynamic recrystallization.
结果表明,在等效应变最大的区域,奥氏体动态再结晶并非最完全,而剪应变对动态再结晶的影响则较大,在剪应变最大的区域,再结晶最完全,晶粒最细小。
3.
The shear strain distributions over the cross-sectionand the forms of damage of bending beams were obtained.
本文用高灵敏度云纹干涉法对ＣＡＬＬ混杂复合材料在纤维方向和垂直于纤维方向的弯曲及破坏特性进行了实验研究，得到了弯曲试件横截面上的剪应变分布规律及破坏形式。
6) Shearing strain
剪切应变
1.
Analyses of Shearing Strain Characteristic and Microstructure on Semi-Solid ZA27 Alloy;
半固态ZA27合金剪切应变特征与显微组织分析
补充资料：鏖剪
1.谓经过苦战予以剪除。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条