1) shear strain rate
剪应变率
1.
Effects of shear strain rate on mechanical behavior of Zhanjiang strong structured clay;
剪应变率对湛江强结构性黏土力学性状的影响
2.
This paper discusses the rheological property for Magnetorheological fluids in the presence of an applied magnetic field and in the different shear strain rate.
本文采用实验的方法 ,对不同组分的磁流变液 ,在不同的磁场强度、不同的剪应变率下的流变特性进行了研究 ,得到了磁流变材料的性能随磁场强度、剪应变率、磁介质百分率、磁介质微粒大小等变化的规律 ,为磁流变材料的开发研究和工程应用提供了基本依
3.
The definitions of shear strain rate and apparent viscosity in fluid mechanics are introduced to analyze the dynamic hollow torsional tests of post initial liquefied sand.
引入流体力学中的剪应变率和表观黏度的概念,对振动扭剪试验中饱和砂土液化后的流动特性进行了分析。
2) shear strain rate
剪切应变率
1.
Distribution and evolution of shear strain rate,in-and off-plane displacements in free surfaces were investigated.
因此,本文采用FLAC-3D研究了三维岩样在单轴压缩及强烈端面约束条件下,自由面的剪切应变率、离面位移及面内位移的分布及演变规律,研究了自由面垂直对称轴上定点位移随时步的演变规律。
2.
Anomaly in shear strain rate (SSR) and its evolution as well as mechanical behavior of rock in biaxial plane strain were modeled by use of FLAC.
利用拉格朗日元法(FLAC)模拟了岩样的宏观力学行为、剪切应变率异常及演化。
3) shear strain transmission ratio(SSTR)
剪应变传递率
1.
Based on dynamic interaction analysis between soil mass and a underground structure,from the consideration of displacement response characteristics of the underground structure against earthquake action, a new concept-shear strain transmission ratio(SSTR)was introduced.
基于土体与地下结构动力相互作用分析法,从考虑地下结构抗震的位移响应特性入手,引入剪应变传递率这一新概念。
4) high shear rates
高剪切应变率
5) velocity of shear strain
剪切应变速率
1.
This paper analyzes manifold effect on trixial compression test,such as the restriction of gum membrane,velocity of shear strain,deformation of stress measure ring etc.
介绍了橡皮膜约束、剪切应变速率、量力环变形量等因素对抗剪强度的影响,并对其作了详细分析,提出了合理的校正方法,使试验精度有效提高。
6) shear strain rate history
剪应变率历史
1.
Temperature and shear strain rate history effects on the constitutive relations of Fe base alloy under torsion have been studied by means of interrupted load at temperatures from 20℃ to 500℃ and shear strain rates from 0.
用间歇式加载的方法,研究了温度和剪应变率历史在20 ～500℃和0 。
补充资料：应变硬化率
strainhardeningrate：表示应变硬化的程度，即表示塑性变形阻力（继续塑性变形所需外应力）随塑性变形量的增大而增加的现象的程度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条