1) DT2 iron
DT2工业纯铁
1.
Planar detonation wave was generated to load the DT2 iron and HR2 steel cuneal sample by detonating TNT.
使用平面爆轰波起爆元件起爆TNT炸药,分别对DT2工业纯铁和HR2抗氢钢楔形样品进行了冲击加载实验。
2) industrial pure iron
工业纯铁
1.
Determination of Nine Impurity Elements in Industrial Pure Iron by Emisson Spectrometry;
工业纯铁中九种杂质元素的光谱分析方法
2.
Many technical literatures and textbooks took industrial pure iron as low carbon steel and affirmed the industrial pure iron forging temperature according to carbon steel forging temperature range,which would cause industrial pure iron forged part being discarded as useless.
不少资料和教材都将工业纯铁等同一般低碳钢,根据碳钢的锻造温度范围确定工业纯铁的锻造温度,这必然导致工业纯铁锻件报废。
3.
The effect of Mo and Ti ions on the corrosion behavior of industrial pure iron was studied with ion implanted method.
利用离子注入技术对工业纯铁进行了Mo+离子和Ti+离子的注入。
3) iron
[英]['aɪən] [美]['aɪɚn]
工业纯铁
1.
The Research of the Effect of Chloride Ion on the Mechanism of the Corrosion of Iron in Dilute Acidic Solutions;
稀酸溶液中氯离子对工业纯铁的腐蚀机理研究
4) pure iron
工业纯铁
1.
Commercial pure iron was modified by high frequency and low voltage plasma immersion and ion implantation(HLPIII) at different pulse duration.
采用低电压高频率脉冲等离子体浸没离子注入与氮化技术在工业纯铁上进行氮离子注入及氮化强化处理,研究了不同脉冲宽度下,工业纯铁等离子体浸没离子注入与氮化处理的结构及性能。
2.
The current fluctuation features of pure iron in NaNO 2+NaCl solutions were studied by a potentiodynamic polarization method, and the effects of recycled polarization on the metastable pitting behavior were investigated.
用动电位极化法研究了工业纯铁在NaNO2 +NaCl溶液中的电流波动特征 ,探讨了多次极化对亚稳态孔蚀行为的影响。
3.
Through a study of the corrosion inhibition by polyarcylic acid and dodecylbenzyldimethyl ammonium bromide for pure iron in HCl solution, this paper presents the development of a new method not only for the rapid evaluation of the efficiency of a corrosion inhibitor, but also for the quantitatively determination of the type of corrosion inhibitor.
研究了聚丙烯酸（PAAC）、苯扎溴铵（DBDAB）在工业纯铁／盐酸体系中的缓蚀性能，推导了一种既能快速测出腐蚀缓蚀剂的缓蚀效率又能确定腐蚀缓蚀剂类型的新方法，定义了能够确定腐蚀缓蚀剂类型的因子P。
5) ingot
[英]['ɪŋɡət] [美]['ɪŋgət]
工业纯铁
1.
In seawater and fresh water,the performance of ingot and 35 steel was measured by constant current experiment,and then their anodic polarization curves were drawn.
利用恒电流试验测试了工业纯铁和35钢在海水和淡水中的牺牲阳极性能,利用电流阶跃阳极极化法测试了二者在海水和淡水中的极化性能。
2.
Brass and ingot were selected for the preparation of slip band samples.
选择黄铜、工业纯铁进行滑移带观察样品的制备。
6) commercially pure titanium
工业纯铁<冶>
补充资料：纯铁
纯铁
pure iron
纯铁下3种。PUre lron①铁含量大于99.工业纯铁5%的铁。:纯度为99.6一99只叱分为以二七面石民班‘.阿姆科(Armco)铁、电解铁和拨基铁。、阿姆科铁的最大磁导率尚为3500一5000，矫顽力Hc为乓8一80A/m，1.0T磁感应强度下的磁滞损耗几约为‘2.12w/kgo②纯铁:纯度为99.90一99.95%。是将工业纯铁在纯干氢中高温净化处理或真空重熔处理，将残余杂质元素进一步去除而制成。用于科学实验。③高纯铁:纯度为99.990一99.997%。是将工业纯铁或纯铁再经区域提纯制成。其软磁性能优越，月m可达100000，Hc为4.OA/m，只约为0.08W/kg，其成本高。 (何忠治)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条