1) commercial pure titanium
工业纯钛
1.
Surface nanocrystallization of commercial pure titanium welded joints and its influence on properties;
工业纯钛焊接接头的表面纳米化及其性能
2.
The extreme high temperature oxidation behavior of commercial pure titanium was researched by Gleeble-1500 thermal simulator.
通过Gleeble-1500热模拟机研究了在特高温度下工业纯钛的氧化行为。
3.
Based on the empirical electron theory of solid and molecule (EET), the valence electron structures of α-Ti and α-Ti-S (S denotes elements of O, N and C) which exist in commercial pure titanium were calculated, and the transition temperatures of α?β were also calculated for α-Ti and α-Ti-S phases.
基于"固体与分子经验电子理论",计算了工业纯钛中的α-Ti相及非金属元素形成的α-Ti-S(S代表O、N、C)相的价电子结构,并计算了α-Ti相及α-Ti-S相的α?β转变温度。
2) commercially pure titanium
工业纯钛
1.
Electrochemical behavior of commercially pure titanium and 00Cr25Ni22Mo2 stainless steel in acidic medium;
工业纯钛和00Cr25Ni22Mo2不锈钢在酸性介质中的电化学行为
2.
The surface nanocrystallization of commercially pure titanium was realized by shot peening treatment.
利用喷丸处理技术实现了工业纯钛的表面纳米化,利用光学显微镜(OM)、扫描电镜(SEM)和透射电镜(TEM)对表层组织演变过程和表层晶粒纳米化的细化机理进行了研究,并用显微硬度计对表层硬度进行了测试。
3.
Through appraising experiment of welding procedure, TIG welding technique of commercially pure titanium Electroplating trough is devised, and the main points influencing the quality and deformation of welding are analyzed,and it puts forwards the Process measures .
通过焊接工艺评定试验,设计了工业纯钛电镀槽的氩弧焊焊接工艺,分析了影响其焊缝质量和焊接变形的主要原因,并采取了相应的工艺措施。
3) pure titanium
工业纯钛
1.
Welding of pure titanium on petrifaction device;
石化装置用工业纯钛的焊接
2.
According to the welding characteristic of pure titanium and the valuation of welding process, TIG welding technique of electroplating trough was designed, factors influencing the quality of weld were analyzed, and the process measures to improve the quality of weld were put forward.
根据工业纯钛的焊接特性,通过焊接工艺评定试验,设计了电镀槽的氩弧焊焊接工艺,分析了影响焊缝质量的主要原因,提出了提高焊缝质量的工艺措施。
3.
This paper introduced the welding procedure of plasma arc welding for pure titanium.
通过对工业纯钛的等离子弧的焊接工艺介绍 ,分析了钛的焊接要点 ,提出了钛在焊接时熔池和焊接区的保护措施 ,并从保护装置和喷嘴形式上做了改进 ,从而在合理的规范参数下获得满意的接头质
4) titanium
[英][tɪ'teɪniəm] [美][tɪ'tenɪəm]
工业纯钛
1.
A study on crevice corrosion behavior of titanium and 00Cr25Ni22Mo2 stainless steel;
工业纯钛和00Cr25Ni22Mo2不锈钢的缝隙腐蚀
2.
Titanium and titanium alloys have some very attractive properties enabling them to be used in aerospace applications.
以热等离子束作为等离子源,以氮气、氢气混合气体作为工作气体,对工业纯钛进行表面渗氮处理,并利用显微硬度仪、X射线衍射仪、扫描电镜、金相显微镜分别对氮化后试样进行显微硬度测定、相结构及断面形貌分析。
3.
General corrosion behaviors of titanium in sea water and effects of temperature, surface roughness of the samples on cathodic hydrogen evolution have been studied by dynamic polarization, transient linear polarization, weak polarization and coulostatic method.
采用动态极化、暂态线性极化、弱极化和恒电量法等电化学技术研究了工业纯钛在海水中的全面腐蚀性能，探讨了温度、试样表面粗糙度对钛上阴极析氢的影响。
5) CP Ti
工业纯钛
1.
Hydroxyapatite(HAP) coating was synthesized via biomimetic method,by immersing commercial pure titanium(CP Ti) in simulated body fluid(SBF) after alkali pre-treatment and heat treatment.
将表面抛光和高能喷丸处理的工业纯钛在5mol/L NaOH溶液中处理后,在模拟体液(SBF)中矿化生成羟基磷灰石(HAP)涂层。
2.
Hydroxyapatite (HA) coating was dip-coated by sol-gel method on the surface of Commercial Pure Titanium (CP Ti).
利用溶胶-凝胶法在工业纯钛表面制备羟基磷灰石(HA)涂层,探讨了酸洗和浓碱热处理两种基体预处理工艺对涂层的影响;用接触角仪测量了涂覆前两种预处理后基体的接触角并计算其表面能;用扫描电镜(SEM)、X射线衍射仪(XRD)分析了基体和涂层的表面、截面形貌及成分。
6) commercial pure titanium(CP-Ti)
工业纯钛
1.
The outcome and microstructure change of commercial pure titanium(CP-Ti) processed by surface mechanical attrition(SMAT) were analyzed.
通过对工业纯钛表面机械研磨(SMAT)这种变形方式的结果和微观组织变化的研究,分析了工业纯钛的晶粒细化机制,讨论了其他剧烈塑性变形技术无法制备出晶粒尺寸更小的纳米晶的原因。
补充资料：工业纯钛
分子式：Ti
CAS号：
性质：含一定量的氧、氮、碳、硅、铁及其他元素杂质的α相钛。具有优良的冲压工艺性能，好的焊接性能，对热处理及组织类型不敏感，在令人满意的塑性条件下具有一定的强度。工业纯钛是按照杂质元素的含量划分等级的。它的强度主要取决于间隙元素氧、氮的含量。它在海水中具有高的抗腐蚀性能，但在无机酸中较差。一般用于制造在-253～350℃温度下工作的、受力不大的各种板材零件或锻件，也可制造铆钉线材和管材。
CAS号：
性质：含一定量的氧、氮、碳、硅、铁及其他元素杂质的α相钛。具有优良的冲压工艺性能，好的焊接性能，对热处理及组织类型不敏感，在令人满意的塑性条件下具有一定的强度。工业纯钛是按照杂质元素的含量划分等级的。它的强度主要取决于间隙元素氧、氮的含量。它在海水中具有高的抗腐蚀性能，但在无机酸中较差。一般用于制造在-253～350℃温度下工作的、受力不大的各种板材零件或锻件，也可制造铆钉线材和管材。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条