1) critical speed
临界波速
1.
We study the existence of travelling wavefront solution for a competion systemin ecological dynamics,the necessary and sufficient conditions for existence of this kind of soluion and critical speed are got.
研究一类竞争生态系统波前解的存在性,得到了波前解存在的充分必要条件和临界波速。
2) critical shear wave velocity
临界剪切波速
3) critical flow rate
临界流速
1.
The result indicates that critical flow rate at the beginning of sand production declines with the rising of oil viscosity and pH value of fluid; when pH value exceeds 12, sand production increases remarkably.
研究结果表明,开始出砂的临界流速随原油粘度以及流体pH值的升高而下降;当pH值超过12以后,出砂量显著增大。
2.
The results indicate that critical salt concentration and critical flow rate exit on the saltwater-freshwater interface.
试验结果表明,咸淡水界面上存在临界盐浓度值和临界流速值,当入流溶液浓度达到临界盐浓度和流速达到临界流速时,都会产生颗粒释放现象,导致砂柱的渗透率下降,水敏性发生。
3.
The critical flow rate,VT could be estimated from the statistic curves.
从统计曲线上估算了临界流速的大小,当流速超过上述临界值时,管线服役寿命不会超过2年;临界流速从2004年时的4。
4) critical velocity
临界速度
1.
The predicted pressure drop per unit length was compared with the experiments as a result that a critical velocity at which the wall slip begins was obtained and that the relationship .
计算得出水煤浆在管道中流动产生滑移的临界速度,并得到临界速度与管径的变化关系。
2.
The dynamic stress, strain and displacement of the windshield are obtained, and the critical velocity when the windshield failure is also gotten on the FE analysis.
并对某型号风挡进行了鸟撞动响应分析,得出了鸟的运动轨迹和风挡的位移、应力、应变响应以及风挡玻璃的鸟撞临界速度,经与试验结果比较,两者吻合较好。
3.
In radial ultrasonic grinding, the contacting state is discontinuous and the critical velocity accords with the existing vibration cutting theory.
径向超声振动磨削与纵向超声振动磨削 ,其主要差别是磨粒与工件的接触状态不同 ,在径向超声振动磨削中 ,磨粒与工件的接触是间断性的 ,它的临界速度特征符合现有的振动切削理论 ,而在纵向超声振动磨削中 ,磨粒与工件是永久性接触 ,不存在磨粒与工件表面分离的特点。
5) critical rotating speed
临界转速
1.
The critical rotating speed of vacuum plating Cr under the condition of ensuring plating Cr reliably is educed by analyzing the vacuum plating Cr theory of code disc and radial grating and the film forming mechanism.
通过对码盘、圆光栅真空镀铬原理及膜层形成机理的分析,给出膜层厚度和影响其均匀性和致密性的主要因素之间的关系式以及安全成膜时被镀件的临界转速,为真空条件下获得厚度均匀、致密性好的铬膜提供了理论依据。
2.
Critical rotating speed, a basis for determining the rigidity and rotating speed of the main axle, is an important parameter in the design and manufacture of woodwork machine tool.
临界转速是木工机床设计与制造的一个主要参数，为确定木工机床主轴刚度、主轴转速的依据。
3.
Critical rotating speed of vacuum plating Cr was given under the condition of ensuring plating Cr reliably.
给出了动态真空镀铬保证安全成膜时被镀件不应超过的临界转速ｎ临，为动态目标盘动态旋转条件下的可靠镀铬提供了理论依
6) critical velocity
临界风速
1.
Numerical simulation and analysis of smoke characteristics and critical velocity in underground railway tunnel while fire;
地铁隧道火灾烟气特性与临界风速的数值模拟分析
2.
Furthermore, a critical velocity of air flow expression for transition from upward smoldering to flaming combustion is constructed.
根据在此条件下的阴燃特点,建立了稳定阴燃时实验材料内部的气流速度模型和阴燃向有焰火转化时的临界风速判定表达式。
3.
The model for calculating the critical velocity in a tunnel cross-passage is established on the basis of the critical Froude theory.
从临界Froude数理论出发建立了计算联络通道临界风速的模型。
补充资料：波速
波传播的速度。①单色波的波速v与波长λ、波源振动频率f之间的关系为：v=λf。机械波的波速由介质的弹性模量和密度所决定。在室温下，声波在空气中的传播速度约为340米/秒；电磁波在真空中传播的速度等于光速，约为3×108米/秒。②海浪波速(c)的大小取决于波长(λ)或海区水深(h)。当海区水深很大时，波速仅与波长有关，而与水深无关，即为c2=gλ2π；当海区水深很小时，波速仅与水深有关，而与波长无关，即为c2=gh。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条