1) homopolymer emulsion
均聚乳液
2) emulsion polymerization
乳液聚合
1.
Study on emulsion polymerization of perfluoroacrylates;
丙烯酸氟烷基酯乳液聚合的研究
2.
Research on Preparation of Monodisperse Magnetic PS Microsphere by Emulsion Polymerization;
乳液聚合法制备单分散性PS磁性微球的研究
3.
Application of ant colony algorithm to optimization of monomer ratios in emulsion polymerization;
蚁群算法在乳液聚合单体配比优化中的应用
3) emulsion copolymerization
乳液共聚
1.
Study on emulsion copolymerization of methyl methacrylate and N-p-tolylmaleimide;
MMA/N-对甲苯基马来酰亚胺乳液共聚的研究
2.
In order to prepare the crosslinking polymer microbeads, the free radical emulsion copolymerization of methylmethacrylate (MMA), acrylonitrile (AN) and divinylbenzene (DVB) with the initiator potassium persulphate (KPS) at 75℃ under constant stirring speed was investigated.
为制备甲基丙烯酸甲酯(MMA)-丙烯腈(AN)-二乙烯基苯(DVB)刚性微粒,在75℃、过硫酸钾(KPS)作引发剂、恒搅拌速率下研究了MMA/AN/DVB乳液共聚动力学,考察了KPS用量、单体配比、交联剂DVB对共聚速率的影响。
3.
VAc/VeoVa10 emulsion copolymerization was studied using sodium dodecyl sulfonate (SDS) as an emulsifier, potassium persulfate (KPS) as an initiator and PVA as a protective colloid.
以十二烷基硫酸钠为乳化剂,聚乙烯醇为保护胶体,过硫酸钾为引发剂,进行醋酸乙烯酯-叔碳酸乙烯酯(VAc-VeoVa10)乳液共聚。
4) Copolymerization emulsion
共聚乳液
1.
Comb-branched waterborne polyurethane/poly(isobornyl acrylate)(CWPU/PIA ) copolymerization emulsion was prepared,with isobornyl acrylate(IBOA) as the monomer and with CWPU as the dispersant.
以丙烯酸异冰片酯(IBOA)为单体、梳状水性聚氨酯(CWPU)预聚物为分散剂,制备了梳状水性聚氨酯/聚丙烯酸异冰片酯(CWPU/PIA)共聚乳液。
2.
With vinyl acetate(VAc),acrylic acid(AA) and methyl methacrylate(MMA) as raw material,so a fast drying adhesive for cigarette based on VAc/AA/MMA copolymerization emulsion was prepared.
以醋酸乙烯酯(VAc)、丙烯酸(AA)和甲基丙烯酸甲酯(MMA)等为原料合成了一种快干卷烟胶用三元共聚乳液。
5) copolymerized emulsion
共聚乳液
1.
Study of four-substance copolymerized emulsion of methacrylic acid system;
甲基丙烯酸系四元共聚乳液的研制
2.
The multicomponent copolymerized emulsion was prepared by emulsion copolymerization with methyl methacrylate,butyl acrylate,styrene and acrylic acid as copolymerized monomers.
以甲基丙烯酸甲酯、丙烯酸丁酯、苯乙烯和丙烯酸为共聚单体 ,经乳液共聚合反应制得四元共聚乳液 。
6) emulsion copolymerization
乳液聚合
1.
Study on regularity in emulsion copolymerization of BD-ST-2-VP latex;
丁苯吡乳液聚合的聚合规律研究
2.
The St-BA-AM-DADMAC copolymer emulsion was prepared via emulsion copolymerization initiated by redox intiator(NH_4)S_2O_8/NaHSO_3.
以丙烯酸丁酯-苯乙烯-丙烯酰胺-二甲基二烯丙基氯化铵为聚合体系,以过硫酸铵/亚硫酸氢钠为氧化还原引发剂,经乳液聚合反应制得四元共聚乳液。
3.
In this paper , epoxy oil-extended ACM was synthesized by means of emulsion copolymerization using BA, EA, β-CEMOA as comonomers , GMA as crosslinking monomer, DOP and DBS as oil-extended comonomer.
以丙烯酸丁酯(BA)、丙烯酸乙酯(EA)为主单体,β-丙烯酰氧基丙酸甲氧基乙酯(-βCE-MOA)为低温单体,甲基丙烯酸缩水甘油酯(GMA)为硫化点单体,邻苯二甲酸二辛酯(DOP)、癸二酸二丁酯(DBS)分别作为充油单体,采用乳液聚合法制备了环氧充油型丙烯酸酯橡胶(ACM)。
补充资料：聚醋酸乙烯乳液
聚醋酸乙烯乳液是由醋酸乙烯经乳液聚合后加入邻苯二甲酸二丁酯增塑剂而得，外观为乳白色粘稠状流体，俗称白乳胶，简称PVAc固含量为45%～50％，粒径范围100～1000nm。PH值4～5。粘度＞5000mPa·s。残留单体<1％。灰分＜3％。玻璃化温度大于28℃。最低成膜温度15℃。聚醋酸乙烯乳液粘接性强、稳定性好、价格低廉，其缺点是耐水性差，胶膜脆性较大。无毒，不燃。
用作木材、织物、纸品等的胶粘剂，配制腻子，与脲醛树脂混合使用，改善性能，可作为淀粉胶粘剂的稳定剂．
贮存于温度为5～30℃的库房内，贮存期为6个月。
用作木材、织物、纸品等的胶粘剂，配制腻子，与脲醛树脂混合使用，改善性能，可作为淀粉胶粘剂的稳定剂．
贮存于温度为5～30℃的库房内，贮存期为6个月。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条