1)  BOM
物料表
2)  material list and material relation list(BOM) of MRPⅡ
物料表与物料关系表
3)  material
物料
1.
Research on material s pose probability of electro - magnetic feeder;
电磁振动上料物料姿态概率研究
2.
Study of material motion stability in electro-magnetic vibration feeder;
电磁振动上料物料运动稳定性研究
3.
Tips for Establishes the Enterprise Material Codes Standard;
制订企业物料编码标准的若干体会
4)  matter
物料
1.
Research of cantilever screen grating diagrid and matter coactions way imitation;
悬臂筛筛条和物料相互作用方式模拟研究
2.
Has studied vibration of a single grating diagrid firstly,analyzed the montion of matter on screen,lastly analyzed and simulated the track of matter on it by using Matlab.
针对一种新研制成功的振动筛—梯流棒条筛,首先研究了振动筛棒条的振动规律,之后主要分析了其上物料的运动,并以Matlab语言为基础分析和仿真了物料运动的轨迹。
3.
The paper studies the screen with ellipse track and establishes a new fomula for transitting probability of matter,which is suit to the cantilever screen.
文章以椭圆振动棒条筛为研究,建立了适合此筛的物料透筛概率公式;并以透筛概率为准则,研究了筛体振动参数的影响,并对振动参数的选择提出了合理的建议。
5)  materials
物料
1.
A detailed description was made to the general working principle of powder materials pneumatic transportation, working characteristics of Y95 model fluctuating low pressure pneumatic conveyer, Y91C model whirling pneumatic conveyer, and S-series of pneumatic transportation system commonly used in foundry shops.
根据输送物料的不同,结合实践经验,给出了选用输送装置时的注意事项。
2.
The self-grinding technique of the materials was proposed on the basis of grinding principle of ball mill.
根据球磨机的研磨原理,提出了物料自粉碎技术,从而降低了研磨成本,提高了研磨效率,保证了料浆质量。
3.
According to the difference of materials production and their monitoring requirements,the monitoring levels are partitioned and designed and the multi-layer materials monitoring mode is found.
针对企业对各种物料的生产情况和生产进度监控需求的差异,划分和定义了生产过程的监控级别,建立了面向生产过程的物料动态跟踪多层监控模型。
6)  materiel
物料
1.
The rule of materiel motion was analyzed on sieve.
该装置将残膜和残茬与土壤分离,并且将分离出的物料向后输送至收集装置。
参考词条
补充资料:物料表面积测定


物料表面积测定
surface area measurement

wuliao biaomlanji eeding物料表面积测定(surfaee area measurement) 利用粒状物料对介质的渗透和吸附性质,检测其表面积的选矿测试技术。在选矿技术中,常用比表面积来度量微细粒物料的单个颗粒大小或粒群的颗粒组成,以及计算选矿药剂在物料上的吸附量等。粒状物料单位质量的表面积称为质量比表面积,用S、表示;单位体积的表面积称为体积比表面积,用S,表示。测定粒状物料比表面积的方法有渗透法和吸附法两类。 渗透法根据比表面积定义及达西(Darcy)渗透定律u一Q/A一k△p/L导出的物料质量比表面积 i/i。3八么。 S卜=一八l子‘一长弓上(1) 一”热Vk,(1一:)“QL产由于粒状物料的平均粒度d。与其质量比表面积S。之间存在sb一ks/Psd。的关系,可导出: 、p一、/;s~犷二全孕誉井(2) V一’(ALP,一m)J△P达西定律和式(1)、(2)中,A为粒状料层断面积;L为料层厚度;△P为料层两侧的压力损失;Q为流量;u为渗流速度;k为渗流系数;Ps为物料密度;k,为比表面形状系数;产为流体粘滞系数;m为物料的质量;。为料层的空隙度,。一1一二袋~。由上述关系,物料的平均粒 入‘P,一一-一’一”‘’‘’一度可经测试其质量比表面积求得。 根据上述原理设计了多种渗透式表面积测定仪或粒度计,如平均粒度测定仪(图1)。用这类表面积测定仪测试粒度大于5群m的物料时,可以用水作渗透液;对粒度小于5拜m或能与水发生反应的物料(如水泥),用气体或其他液体为渗透流体。平均粒度测定仪可以测定平均粒度为0.2一50拜m的物料。用气泵将空气打到试管的物料层中,压力降△P由U形测压管显示,同时由粒度读数板上读出待测物料的平均粒度值。班即 图1平均粒度测定仪 1一空气泵;2一过滤器;3一空气压力调节器; 4一稳压器;5一干燥器;6一待测料粉;7一试料管; 8一高位针阀;9一测量范围选择开关;10一低位针阀; 11一粒度读数板;12一U形压力计;13一压力计水位调节器 吸附法此法中最常用的是美国人布鲁诺特(S.Brunauert)、埃米特(P.H.Emmett)和特勒(E.Teller)3人提出的BET法。它以低温下固体表面对气体的多层物理吸附理论为基础。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。