1) Epoxy resin adhesive
环氧树脂粘接剂
2) epoxy resin
环氧
1.
Effect of Polyether on Preparation of Epoxy Resin-PU IPN;
聚醚对环氧-聚氨酯互穿网络制备的影响
2.
The title oil resistant coatings for fuel tanks has been developed by choosing proper polyester resin,epoxy resin and appropriate polyisocanate hardener,The results indicated that the coatings shows good low temperature drying property and corrosion protection, oil-resistance,particularly hot-oil-resistance.
通过选择适当的聚酯树脂和环氧树脂,配以适当的异氰酸固化剂,研制了一种用于油箱的环氧聚氨酯耐油涂料。
3.
In this paper, the application and development of epoxy resins act as the inhibitor of rocket propellant are reviewed; the recent progress of work is also introduced.
综述了环氧包覆材料的历史发展和国内外现状 ,根据环氧树脂增韧改性的进展 ,提出了环氧包覆材料的发展方向。
3) epoxy
环氧
1.
Research development of waterborne curing agent for epoxy resin;
水性环氧固化剂的研究进展
2.
The self assembly at carbon fiber/epoxy interface in composites;
碳纤维增强环氧复合材料的界面自组装
3.
Preparation and optical properties of ZnO/epoxy nanocomposites;
氧化锌/环氧纳米复合材料的制备及其光学性能研究
4) oxido-
（环）氧
5) epoxide resin
环氧树脂
1.
Organic-inorganic hybrid composites were prepared by the sol-gel method for the wear-resistant coating on epoxide resin and TEOS,KH-560,KH-570 were used as starting materials.
以正硅酸乙脂、KH-560、KH-570为先驱体,采用溶胶-凝胶法结合旋转涂敷法在环氧树脂基体上制备了有机硅耐磨涂层。
2.
A new woodceramics was fabricated from wood powder and epoxide resin.
以香杉木粉和环氧树脂为原料制备了木材陶瓷,利用TGA对木粉、环氧树脂的热分解过程进行了研究,通过扫描电镜、X射线衍射技术对木材陶瓷的微观结构和物相进行表征,研究了碳化温度对木材陶瓷得碳率、体积收缩率、耐磨性的影响。
3.
The aqueous polyurethane modified by epoxide resin(WPUE) was prepared with trimethylolpropane(TMP) as cross linker, then epoxide-acrylate-polyurethane(WPUEA) hybrid dispersions were synthesized by free-radical emulsion polymerization which were carried out by using azodiisobutyronitrile (AIBN) as initiator and methyl methacrylate (MMA) as monomer.
以三羟甲基丙烷(TMP)为交联剂,先用环氧树脂改性聚氨酯(PU),得到环氧树脂改性的水性聚氨酯(WPUE)分散体,然后加入甲基丙烯酸甲酯(MMA)和引发剂偶氮二异丁腈(AIBN),通过自由基乳液聚合得到聚氨酯-环氧树脂-丙烯酸酯(WPUEA)杂合分散体,并通过傅里叶红外光谱、凝胶渗透色谱、粒径分析仪和透射电镜对其进行了表征。
6) epoxy
环氧树脂
1.
Study on the curing process of benzoxazine-epoxy copolymerization;
苯并口恶嗪/环氧树脂共聚固化过程研究
2.
Effect of Nano-SiO_2 on Properties of PP/Epoxy Blends;
纳米SiO_2对聚丙烯/环氧树脂共混物性能的影响
3.
Synthesis and Low Surface Energy Property of New Polyblends of Amino(polysiloxane)-polyurethane-epoxy and PTFE;
聚四氟乙烯、有机硅复合改性聚氨酯/环氧树脂共混聚合物的合成及其低表面能特性
参考词条
补充资料：环氧中固化剂的重要性 最终决定环氧热塑性能
环氧树脂指的是一系列含有一个以上环氧基团的分子或低聚物。这些产品是固态的或者是稠度类似蜂蜜的液态，能够通过其中的环氧端基发生反应生成三维网络结构，从而赋予最终材料以刚度，硬度以及不流动性等性能。
最终制品通常具有以下性能:优异的电性能；由于含有极性基团，从而具有很好的粘接性能；收缩小；抗冲击性能好；抗吸湿性。这个系列的热固性塑料有很多的应用，如复合材料，涂料，粘和剂以及胶囊材料。选取的与环氧树反应的化学药品被称做固化剂(或硬化剂),且它通常含有与氮，氧，或硫相连的活泼氢。固化剂的选取需要考虑很多参数，而且在很大程度上将决定最终环氧热塑性材料的性能。
为了帮助您在具体的应用中做出正确的选择，您应该考虑以下几个方面：
环氧树脂固化剂的定义及作用机理；
复合材料制品中需要考虑的参数；
复合材料制品所用的工业化固化剂产品主要特征的描述。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。