1) ￣+Load
~+负荷
2) burden
负荷
1.
Analysis and Simulation of burden on a cell in TD-SCDMA system;
TD-SCDMA系统小区无线负荷研究与仿真
2.
Results Burden score of family caregivers for stroke survivors was 48.
目的了解脑卒中主要居家照顾者的负荷水平及其影响因素。
3.
All the participants were assessed by the Burden Scale and the Social Support Scale of the main home infirmarian of the stroke patients.
目的 寻求脑卒中病人居家主要照顾者负荷水平与社会支持度之间的关系。
3) load
负荷
1.
FEA of 11.00R20 TBR tire under load;
11.00R20轮胎在负荷作用下的有限元分析
2.
Influence of load fluctuation on reaction system of LLDPE plant and its countermeasure;
LLDPE装置负荷波动对反应系统的影响及措施
3.
Analysis about unbalanced of twin-motor load of belt conveyor;
带式输送机双机拖动负荷不平衡分析
4) loads
负荷
1.
e,a nutrient balance model of the agricultural land,an emission model that was used for the estimation of nutrient emissions from catchments to river systems,and a riverine retention model that was used for the estimation of nutrient loads from emissions.
利用实测的河流系统的负荷数据,对模型系统进行验证。
2.
It signifies much to the fast calculation in engineering and the research on the variable time step algorithm of air conditioning loads.
提出了由小步长反应系数和传递系数求大步长反应系数和传递系数的关系式，极大地简化了求取整倍数时间步长的反应系数和传递系数的计算过程，这对于满足工程实践中快速计算的要求和空调负荷变步长计算方法的研究具有参考意义。
3.
According to the non-point source pollution characteristics of sediment-laden river,combining with the pollutant content relation between the river bed sediment and inner drainage area surface soil,advising the non-point source pollution loads estimation method of soil and water loss region in limited data direction and applying the method in Huaxian section of the Weihe River Basin.
依据多沙河流的非点源污染特点,结合河流床沙中的污染物含量与流域内表层土壤污染物含量间的关系,提出了基于有限资料条件下的水土流失区非点源污染负荷估算方法,并以渭河流域华县断面为例进行了实际应用,结果表明:该法简单易行,资料需求程度不高,计算结果合理,可用于水土流失区非点源污染的初步估算;渭河流域华县断面非点源污染总磷负荷与汛期输沙量相关程度最高,达到0。
5) loading
负荷
1.
Teen-agers Football Players Training with the Characteristics of Football Matches and Controlling of Loading Time;
青少年足球运动员比赛形式训练与负荷时间的控制
2.
In order to study the relationship of microorganisms in bioreactor and enhance nitrogen removal, influence of pH, dissolved oxygen and applied loading on biochemical reaction and population optimizing were studied.
为研究反应器内的微生物种群关系,以强化污水脱N处理,本试验采用上流式曝气生物滤池,以生活污水为原水,在水力负荷、pH值以及溶解氧(DO)方面对微生物进行生化反应和结构优化的影响情况进行了研究。
3.
In order to optimize the nitrification design of the bioreactor,the influence of applied loading and temperature on the population structure of microorganisms in a two-stage upflow biological aerated filter was investigated.
为优化反应器的脱氮设计,就水力负荷、温度对二级上向流曝气生物滤池内微生物种群结构的影响进行了研究。
6) charge
负荷
1.
The circulation,fuel efficiency and charge of circulating fluid bed boiler were influenced by the flow rate of airm distribution button for feedback unit.
回料装置风帽的流通量直接影响锅炉循环量并制约着循环流化床锅炉的燃料效率和负荷的高低 ,而回料装置风帽孔径的大小及数量直接影响着回料风的流通量 ;在每只风帽上增开了 12个Φ3mm的小孔后 ,回料风量从 2 4 0m3 /h增加到了 345m3 /h ,锅炉热效率达到了 89% ,锅炉的负荷也达到了满负荷 75t/
参考词条
补充资料：负荷
负荷
charge
生理组织等在单位时间内所担负的工作量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。