1) extraction
抽出反应
1.
The lithium insertion and extraction characteristics of lithium vanadate Li 1+x V 3O 8,which were obtained by chemical and electrochemical method,were investigated by using LiV 3O 8 prepared by the sol-gel method in CH 3OH,precipitation technique in a high temperature and a low temperature.
介绍了混合导体钒青铜LiV3O8的CH3OH的溶胶凝胶、高温沉淀、低温沉淀等一般制备方法 ,在不同条件下 (化学 ,电化学方法 )制备的插入化合物Li1+xV3O8的插入、抽出反应 ,及其掺杂锂钒氧化物的电化学特性研究现
2) extract
抽出
3) extract oil
抽出油
1.
In order to fabricate rubber packing oil satisfied with some standards,extract oil,a byproduct during solvent refining of lubricating oil,was refined using N-methyl-2-pyrrolidone(NMP).
为了研制符合一定标准的橡胶填充油,以N-甲基吡咯烷酮(NMP)为溶剂对润滑油溶剂精制过程中的副产物抽出油进行抽提。
2.
A rubber filling oil was prepared by extracting a extract oil using furfural as solvent, where the extract oil was from the equipment of refining lubricant oil by solvent.
以糠醛为溶剂对抚顺石油一厂减五线馏分油溶剂精制的抽出油进行抽提,制备了橡胶填充油。
3.
The development and application of furfural extract oil produced by Ji'nan Refinery in rubber industry are mainly presented.
主要介绍济南分公司的糠醛抽出油在橡胶工业方面的开发和应用情况。
4) H pull out force
抽出力
1.
5 phr resorcinol,and with rapid accelerator NS,the scorch time and the cure time extended,the mo-dulus at 100% and 300% of vulcanizate increased slightly,the tear strength after heat aging test and the H pull out force increased greatly,and the pollution and toxicity of resorcinol were also avoided.
5份间苯二酚,促进剂采用快速促进剂NS,胶料的门尼焦烧时间延长,正硫化时间延迟缓慢;硫化胶的定伸应力略有提高,热空气老化后撕裂强度和钢丝抽出力明显提高,同时解决了间苯二酚危害人体健康和污染环境的问题。
5) Extract
抽出液
1.
Non-Hydrogenation Refining of Coker Diesel(Ⅰ) : A Laboratory Study of Extraction by Furfural Refining Lubricating Oil as well as Additive;
焦化柴油全馏分非加氢精制(Ⅰ)——润滑油糠醛精制抽出液加助剂小试
6) H pull-out method
H抽出
1.
The methods of studying the interfacial bonding behavior between aramid cord and rubber was intraduced, and the static bonding behavior in the aramid cord/rubber composite was actually studied and evaluated using H pull-out method.
介绍了芳纶帘线-橡胶界面粘合性能的研究方法,并对芳纶帘线-橡胶复合材料静态粘合性能进行研究,采用H抽出对其进行评价。
参考词条
补充资料:H抽出
分子式:
CAS号:
性质:测定帘子线与橡胶间附着力的指标。黏着力大,帘子线(布)与橡胶的黏着性能良好。试验方法为将帘子线试样嵌入按配方制成的橡胶片内,在规定的压力、温度和时间内硫化,修整成规定规格的“H”型试片,用强力机中测定从试片中抽出帘子线的力。
CAS号:
性质:测定帘子线与橡胶间附着力的指标。黏着力大,帘子线(布)与橡胶的黏着性能良好。试验方法为将帘子线试样嵌入按配方制成的橡胶片内,在规定的压力、温度和时间内硫化,修整成规定规格的“H”型试片,用强力机中测定从试片中抽出帘子线的力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。