1) coning algorithms
圆锥算法
1.
Optimization coning algorithms to the fixed frequency motion;
一种对固定频率运动优化的圆锥算法
2.
Correction of coning algorithms considering the RLG signal filter characteristics;
考虑机抖激光陀螺信号滤波特性的圆锥算法修正
2) coning compensation algorithm
圆锥补偿算法
1.
Based on the practical applying,the quaternion picard iteration,the quaternion fourth order Ronge-Kutta method,coning compensation algorithm and an improved coning compensation algorithm are analyzed and compared in this paper.
该文就实际应用,对四元数毕卡迭代法、四元数四阶龙格-库塔算法、圆锥补偿算法和一种改进的圆锥补偿算法进行了分析和比较,并在典型圆锥运动下进行了仿真,仿真结果表明,四阶龙格-库塔算法具有很高的工程实用价值。
2.
The coning compensation algorithms can be designed using Goodman-Robinson finite rotations theory besides minimal error theory.
圆锥补偿算法不仅可利用最优化理论,还可利用Goodman-Robinson理论进行推导。
3) conic curve scalar multiplication algorithm
圆锥曲线数乘算法
4) conic surface method
圆锥面法
5) Floating cone method
浮动圆锥法
6) cone algorithm
圆锥判定法
1.
This paper describes that there are two choices of the criterion about cut off transverse energy of cone algorithm of jet:One is associated with minijets,the other is associated with great transverse momentum jet.
对“喷注的圆锥判定法”的两个判据之横能阈值作了分别对应于微喷注和大横动量喷注的两种不同选择 ,对这两种情况下不同碰撞质心能量的喷注事件产生率的变化规律进行了研究 ,并将这两种情况分析、比较 ,讨论它们的可能的应用 。
补充资料：55°圆锥管螺纹型式和尺寸
| 螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
| R 1/16 | 1/16＂ | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
| R 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
| R 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
| R 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
| R 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
| R 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
| R 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
| R 1 1/4 | 1 1/4＂ | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
| R 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
| R 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
| R 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
| R 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
| R 4 | 4＂ | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
| R 5 | 5＂ | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
| R 6 | 6＂ | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条