1) impact-performance
冲击性
2) impact properties
冲击性能
1.
Analysis of relationship between interstitial content and impact properties of a type of near α titanium alloy;
一种近α钛合金间隙元素含量和冲击性能关系分析
2.
Effect of fillers on impact properties of high molecular weight polyethylene;
填料对超高分子量聚乙烯冲击性能的影响
3.
Effect of δ-ferrite on impact properties of 12%Cr rotor steel for ultra-supercritical steam conditions;
δ铁素体对12%Cr超超临界转子钢冲击性能的影响
3) impact resistance
耐冲击性
1.
Based on the graphical user interfaces in MATLAB,the artificial neural network was used to predict the hardness,adhesion and impact resistance of the polyacrylate emulsion.
在MATLAB中的图形用户界面下,用人工神经网络(ANN)对聚丙烯酸酯乳液的硬度、附着力和耐冲击性3种性能进行了预测。
2.
It was showed hyperbranched polyester was more than commercial resinous polyols in impact resistance and transparency of matt topcoating film,and its extinction was worse.
以超支化聚合物作为基料与脂肪酸等单体合成了超支化树脂,并利用红外光谱,GPC等仪器对超支化树脂进行表征;同时研究了超支化树脂在聚氨酯哑光面漆中的应用,研究表明:实验所制备的超支化树脂虽然消光效果较差,但是采用超支化树脂部分代替商业哑光树脂可以改善漆膜的透明性及耐冲击性。
3.
The test method standard of film impact resistance and the problem had to be paid attention to when implementing were introduced.
介绍了漆膜耐冲击性的检测方法标准及其实施中应注意的问题。
4) impact toughness
冲击性能
1.
Influence of gas content on impact toughness of deposited metal of martensitic stainless steel;
气体含量对马氏体不锈钢熔敷金属冲击性能的影响
2.
The method of improving the impact toughness of non quenching and tempering steel by controlling the content of minor elements and the hot working technology is discussed.
通过在 40 Mn V钢中控制微量元素含量并控制热加工工艺 ,探讨提高非调质钢冲击性能的方法。
3.
The influences of B content and Nb,V micro-alloying on the impact toughness of low carbon boron steel were investigated by impact tests of low carbon boron steels with different boron contents and of Nb,V micro-alloyed low carbon boron steel.
通过对不同B含量的低碳硼钢和Nb、V微合金化低碳硼钢的冲击实验,研究了B含量及Nb、V微合金化对低碳硼钢冲击性能的影响。
5) impact performance
冲击性能
1.
Effect of nitrogen on the impact performance of low alloyed structure steels;
低合金结构钢中氮对冲击性能的影响
2.
Has proven between the plastic differentmolding impact performance and the size rate of change and otherperformance as well as two targets relevance with emphasis withenhances some performance the prerequisite, enhances each performancefor the synthesis, proposed the corresponding adjustment measure.
本文重点论证了塑料异型材冲击性能与尺寸变化率和其他性能,以及两项指标之间的相关性与提高某项性能的前提条件,为综合提高各项性能,提出了对应调整措施。
3.
This paper,for the first,has used pendulum impact method and even elastic support falling weight bend impact method to give comparison test to impact performance of flexible fiber cement stabilize gravel and common cement stabilize gravel.
运用摆锤冲击法和均匀弹性支撑落重弯折冲击法,首次对柔性纤维水泥稳定砂砾和普通水泥稳定砂砾的冲击性能进行了对比试验研究。
6) impact strength
冲击性能
1.
Different types of EP/PU graded IPNs were prepared by means of casting layer by layer,and its impact strength was studied.
研究了采用梯度IPNs方法提高环氧树脂的冲击性能,设计了新型梯度组分分布数学模型描述梯度组分的分布,采用梯度因子和梯度层数控制梯度IPNs的结构变化。
2.
The impact strength of glass mat reinforced EVA/PP is discussed in this paper.
研究了EVA改性PP/GMT复合材料的冲击性能,结果表明:EVA改性PP可有效的提高复合材料的冲击性能。
3.
However, when the density is fixed, the impact strength is decreased with the adding of SiO 2 particles.
本文研究了SiO2 和纤维增强剂对于聚氨酯硬泡塑料冲击性能的增强效应。
参考词条
补充资料：抗冲击性
分子式：
CAS号：
性质：试样抵抗冲击负荷作用的能力。最简单的、作为检定材料冲击性能的试验方法就是简支梁冲击试验和悬臂梁冲击试验。它是把待测材料制成规定尺寸和形状(有缺口或无缺口长条型)的试样，用一定能量的摆锤击打，以冲断试样所消耗的功除以试样(若有缺口为缺口处)的横截面积来表示，单位kJ/m2。另外，还有很多实用性的抗冲击检验方法。比如，落锤试验，落镖试验以及如管件的坠落试验，安全帽的冲击试验等。
CAS号：
性质：试样抵抗冲击负荷作用的能力。最简单的、作为检定材料冲击性能的试验方法就是简支梁冲击试验和悬臂梁冲击试验。它是把待测材料制成规定尺寸和形状(有缺口或无缺口长条型)的试样，用一定能量的摆锤击打，以冲断试样所消耗的功除以试样(若有缺口为缺口处)的横截面积来表示，单位kJ/m2。另外，还有很多实用性的抗冲击检验方法。比如，落锤试验，落镖试验以及如管件的坠落试验，安全帽的冲击试验等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。