1) recharge
[英][,ri:'tʃɑ:dʒ] [美][ri'tʃɑrdʒ]
充值
1.
This article mainly through smart of a CDMA network to recharge the issue of treatment, to discuss the phenomenon of similar top-up treatment.
主要通过对某地CDMA智能网出现的充值问题进行分析处理,来讨论对出现同类充值现象的处理方法。
2) Filling power
填充值
1.
Study on the changing law of the rag filling power of the flue-cured tobacco duing aging;
烤烟烟叶自然陈化期间烟丝填充值变化规律研究
2.
the proportion of long stands and small stands,while the filling power was clearly affected by opening of moisture exhaust valve and hot-air temperature;2) there were significant correlations between steam pressure of HT and the aroma,harmony and balance,offensive taste,after taste,and gen.
通过正交试验较为系统地研究了工艺参数与烘后叶丝质量的关系,结果表明:在试验范围内,①各试验因素对烘后叶丝结构(整丝率和碎丝率)的影响较小,均未达到显著水平;排潮风门开度和热风温度对烘后叶丝填充值的影响稍显著;②蒸汽压力对烘后叶丝的香气、谐调、杂气和余味以及感官质量总分有重要影响;热风风门开度和排潮风门开度对烘后叶丝的谐调、杂气和余味以及感官质量总分有重要影响;热风温度对烘后叶丝的杂气也有较为显著影响。
3.
The tensile strength comparison of the reconstituted tobacco sheets:A>B>C;but for the filling power:B>C>A.
薄片物理性能受其结构影响,薄片A的抗张强度最大,填充值最小,薄片B抗张强度介于三者之间,填充值最大;薄片C抗张强度最小,填充值处于中间水平。
3) open and charging card
建卡充值
5) Filling value
填充值
1.
Analysis of the orthogonal experiment result in relation to the comparison test result determined the domain factors affecting the filling value and a group of optimal operating conditions.
由正交优化试验和对比试验结果确定了影响烟丝填充值的主要因素和一组最优操作条件 。
2.
The filling values of the cut rag laminae and unexpanded stems with various water contents were tested to establish the relationship between the moisture contents and the filling values with the linear regressive model in the light of statistical theory.
对几种不同含水率（湿基）的叶丝和未膨胀梗丝的填充值进行了测定，运用计算机和数理统计中的回归分析法，建立数学模型，找出二者之间的线性回归方程，结果表明烟丝含水率对烟丝填充值有很大影响；在不同含水率范围内，烟丝填充值与其含水率（湿基）呈线性关系，且斜率不同；不同部位的叶丝与梗丝的填充值随含水率的变化规律相似但不雷同。
3.
In order to obtain the optimal amount of ligneous fiber added in the paper-making tobacco sheet,the effects of the different amount of ligneous fiber added in the tobacco sheet on the thickness,quantitative value,tensile strength,water resistance and filling value of tobacco sheet were studied.
为得到造纸法再造烟叶生产中适宜的外加纤维用量,进行了不同木浆纤维加入量对造纸法再造烟叶厚度、定量、抗张强度、耐水性和填充值等物理指标影响的试验。
6) transfer and add-value
转账充值
1.
Considering the add-value process of the add-value machines in AFC system of Shenzhen metro,the requirements of functions and the implementation of the technology for transfer and add-value with bank cards are analyzed.
结合深圳地铁AFC系统中自动增值机的充值过程,对银行卡转账充值的功能要求和技术实现进行剖析,重点关注设备功能、乘客操作、交易记录传输、后台对账等环节。
补充资料：充炭黑充油丁苯橡胶
分子式：
分子量：
CAS号：
性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
分子量：
CAS号：
性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条