说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 二次配水模型
1)  dual-water distribution model
二次配水模型
2)  secondary cooling water distribution mold
二次冷却配水模型
3)  spraying water model
二冷配水模型
1.
After long operation, it is found in recent years that the secondary cooling spraying water system(spraying water model) can’t meet the requirement, which the high efficient continuous casting ask for on quality, production rate and casting speed.
这两台铸机长时间使用后,近年发现其二冷配水制度(二冷配水模型)已不能适应目前高效连铸下对铸坯的质量要求、对铸坯提高生产率和拉速的要求、对生产品质钢和优钢的要求。
4)  quadratic model
二次模型
1.
Then,the quadratic models given for each district of these four areas and used for predicting the tourists and the ratios of rent of beds are on the sixth and seventh days.
首先,选择旅游人数较多的7个地区,分为滇中、滇西、滇西北、滇东南4个片区,给出每个区的二次模型,并估计它们在初六、初七的旅游人数及床位出租率。
2.
Then the LMTI approach and the STI approach are proposed, which execute a subspace implementation during the course of constructing and solving the quadratic model respectively.
本文针对大规模非线性优化问题当中的界约束优化问题展开研究,从原问题的最优性条件出发,利用仿射尺度变换对变量的边界约束进行隐性处理,建立求取原问题试探步的信赖域二次模型,分别在构造和求解信赖域二次模型的环节中融入子空间实现的思想,提出了两种在子空间上对信赖域子问题求解的内点法:LMTI方法和STI方法。
3.
First, based on quadratic model and Perry s conjugacy condition, two new formulas of the main parameter β_k of conjugate gradient method are proposed.
第一,本文基于二次模型及Perry提出的共轭性条件,导出共轭梯度法的主要参数β_k的两种新形式。
5)  water distribution model
配水模型
6)  distributing model
配水模型
1.
And the system controls the water flow on the basis of distributing model.
合金钢连铸自动配水系统由现场一次仪表、PLC控制机构、执行机构和上位机4部分组成,系统根据配水模型对水量进行控制。
补充资料:二(乙酰丙酮基)二水配位镍
分子式:C10H14NIO4.(H2O)2
分子量:292.94
CAS号:

熔点:228℃
性状:蓝绿色斜方晶系结晶。
溶解情况:微溶于水和甲醇,溶于乙醇。
用途:用作树脂交联剂和固化促进剂;环氧树脂粘合剂的固化剂;有机合成催化剂;燃料油添加剂,可提高润滑性和燃烧性;石油裂解和烯烃聚合催化剂。
制备或来源:以六水合氯化镍为原料,用水将其溶解,在搅拌下,加到乙酰丙酮的甲醇溶液中,再加入三水合乙酸钠溶液,搅拌,溶解后,加热,浓缩,冷却,析出蓝绿色沉淀,过滤,用冷水洗涤,干燥,可得粗制品,将粗制品在甲醇溶液中重结晶精制。
备注:在温甲苯中共沸,脱水,生成乙酰丙酮镍无水物。在真空下加热至100℃,也脱水变成浅绿色无水物。


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条