2) inclined taper
斜圆锥体
1.
The unfolded picture of intersection of 2 inclined tapers is extremly complex and not easy to decide.
斜圆锥体交线的展开图形状较复杂且不易确定,用常规的方法更难找到较好的解决方法。
3) Oblique ellipiic cone
斜椭圆锥
4) slantingly positioned cone
斜置圆锥
5) Oblique elliptic cylinder
斜椭圆锥面
6) Helical Bevel Gears
斜齿圆锥齿轮
1.
The Technique on the Tooth Cutting of Helical Bevel Gears with Addendum Modification Shift;
连续变位的斜齿圆锥齿轮的切齿工艺
补充资料：55°圆锥管螺纹型式和尺寸
| 螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
| R 1/16 | 1/16＂ | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
| R 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
| R 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
| R 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
| R 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
| R 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
| R 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
| R 1 1/4 | 1 1/4＂ | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
| R 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
| R 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
| R 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
| R 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
| R 4 | 4＂ | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
| R 5 | 5＂ | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
| R 6 | 6＂ | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条