说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 临界冲量
1)  critical impulse
临界冲量
1.
Based on the phenomenon of plastic collapse,a dynamic col- lapse criterion is proposed and the relevant critical impulse is given.
由流-固砰击柱的弹-塑性屈后响应规律考察了这类中速冲击屈曲所不同于高速与低速冲击屈曲的屈后特征,通过对铰支柱塑性失效现象的分析定义了动力塑性失效准则,并给出了相应的塑性失效临界冲量
2)  critical discharge
冲淤临界流量
1.
An equation for the critical discharge between scour ing and filling in alluvial rivers was derived through the theory of non|equili brium sediment transport.
利用非饱和和输沙公式 ,首次提出了以悬移质为主的冲积河流中冲淤临界流量与水沙以及边界条件的一般关系。
2.
An equation to calculate the critical discharge for river bed variation in alluvial rivers was derived through the theory of non-equilibrium sediment transport.
利用非饱和输沙公式 ,探讨了以悬移质为主的冲积河流中冲淤临界流量与水沙以及边界条件的关系。
3)  critical impact perforation energy
临界冲击穿透破坏能量
1.
An experimental investigation on perforation of three spans continuous thinwall and thickwall tubular beams filled with water and pressure under lateral impact of blunt, spherical and conical projectiles is reported in this paper, and critical impact perforation models and critical impact perforation energy of continuous tubular beams are obtained.
对三跨连续充水加压的薄壁管梁和厚壁管梁在经受平头、半球形和圆锥形冲头侧向冲击作用下的穿透破坏进行了实验研究,获得了薄壁管梁和厚壁管梁的临界冲击穿透破坏模态、临界冲击穿透破坏能量及动力响应曲线。
4)  critical flux
临界通量
1.
Study on effect of membrane fiber length on critical flux in a novel membrane bioreactor;
新型膜-生物反应器中膜丝长度对临界通量的影响
2.
Study of critical flux in flat-sheet membrane bioreactors;
平板膜生物反应器临界通量测定方法研究
3.
Factors affecting critical flux in submerged flat membrane bioreactor;
影响一体式平板膜生物反应器临界通量的因素
5)  Critical output
临界产量
1.
Through analyzing the effect of the vertical locations of horizontal wells on the critical output and gas breakthrough time of the gas cap reservoir, the curve showing the relationship between the vertical locations of horizontal wells and the critical output as well as the gas breakthrough time is obtained in t.
针对这一问题,从水平井垂向位置对气顶油藏临界产量和见气时间的影响入手,得出了临界产量和见气时间与水平井垂向位置的关系曲线;在综合考虑临界产量和见气时间的基础上,得到了水平井垂向位置与临界产量和见气时间乘积的关系曲线,由曲线趋势得到了气顶油藏水平井最优垂向位置的范围。
2.
The bottom water coning model used by Boyun Guo considered the influence of perforation length on critical output, so it can be used to calculate the perforation length of bottom water reservoir.
由于BoyunGuo等人使用的底水锥进模型引入了射孔长度对临界产量的影响,所以可用于优化底水油藏的射孔段长度。
3.
The paper has discussed the effect of vertical locations of horizontal wells on the critical output and producing pure oil time,analyzed the ratio .
水平井垂向位置与临界产量、产纯油时间、油水密度差和油气密度差比值,以及临界产量与产纯油时间的乘积等关系的研究结果表明,水平井垂向位置越靠近气顶或底水,临界产量越高,但产纯油时间越短;越靠近最佳位置(气水同时锥进到油井中),临界产量越低,产纯油时间越长。
6)  threshold quantity
临界量
1.
Analysis of difference in threshold quantity for identification of major hazard installations between domestic and aboard;
浅析国内外重大危险源辨识中危险物质临界量的差异
2.
Under our country background, the standard of Identification of major hazard installations was revised in application scope, the classification of major hazard installations, the category of dangerous substance, threshold quantity of unit, and so on.
本文对国外发达国家重大危险源辨识标准现状进行了调研,结合我国实际情况,提出了《重大危险源辨识》适用范围、分类、危险物质种类及临界量等方面的修订建议,解决了以前重大危险源申报登记工作中存在的一些技术性问题,可作为我国中长期重大危险源监督工作的指导性文件和重大危险源监管体系建设的依据。
3.
Based on the threshold quantity of Identification of major hazard installations in "Identification of major hazard in-stallations",it makes out the hazardous chemicals catalog and their threshold quantity suitable for China, and offers some suggestion of implementing process safety management in China.
从工艺安全管理(PSM)的角度,对美国、欧盟等的工艺安全管理系统适用范围的定义进行分析,结合目前国内《重大危险源辨识》中给出的部分危险化学品的临界量,以此为基础制定适合我国国情的危险化学品目录并确定各物质的临界量,提出在我国推行工艺安全管理系统的建议。
补充资料:冲量
冲量
impulse 
    力的时间累积效应的量度。是矢量。如果物体所受的力是大小和方向都不变的恒力F,冲量I就是F和作用时间t的乘积。如果F的大小、方向是变动的,冲量I应用矢量积分运算。冲量通常用来求短暂过程(如撞击)中物体间的作用力,即由物体的动量增量和作用的时间而估算其作用力。此力又称冲力。冲量的单位和动量相同,在国际单位制中为千克·米/秒。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条