线路布置,track layout,在线英语词典,英文翻译,专业英语

1) track layout

线路布置

2) automatic making-up siding

自动编组线（箭翎型线路布置）

3) circuit

线路

The results of energy saving are analysed and calculated to high voltage circuit and main transformer after installing inefficiency power compensation apparatus.

本文分析和计算了加装无功补偿装置后的高压供电线路和主变压器的节能效果。

4) Route

线路

Method of setting public transport routes;

公共交通线路布设方法研究

Research purposes: Through making analyses of the landform and geological conditions in the valley zone,the principle of route selection is decided for the purpose of providing basis for the route selection.

研究目的:通过对本段地形、地质条件的分析,确定线路方案的选线原则,从而为线路方案的选择和完善提供依据。

It will be significant in design of the tunnel route selection.

本文对指导隧道线路方案设计具有重要作用。

5) line

线路

Research on the railway line trend in Mongolia;

蒙古国铁路线路走向方案研究

Influence of zero-sequence mutual inductance of the same pole parallel laying line on zero-sequence current protection;

同杆并架线路零序互感对零序电流保护的影响

6) transmission line

线路

Research on preventing icing flashover on transmission line insulators;

输电线路绝缘子冰闪防治措施的研究

Study on least approaching distances between ±800 kV DC transmission line and 1 000 kV AC transmission line in a hybrid corridor;

±800kV直流和1000kV交流线路同走廊时的最小接近距离研究

Utilization and study of transmission line protection communication channel in South Hebei electric power network;

河北南网线路保护通道的使用与研究

参考词条

传输线路屏蔽线路输电线路高压线路超细线路线路压降电缆线路微细线路管线路由线路说明原子与Core 专项分析

补充资料：ANSYS SOLID65环向布置钢筋的例子

ANSYS SOLID65环向布置钢筋的例子
! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1%
! 作者: 陆新征清华大学土木系
!
FINISH
/CLEAR

/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1：不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,

!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,

! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2

! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL

ESIZE,500,0,
! 注意：设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引印制线路线路损耗线路图线路板机床线路线路工程

1) track layout 线路布置 2) automatic making-up siding 自动编组线（箭翎型线路布置） 3) circuit 线路 1. The results of energy saving are analysed and calculated to high voltage circuit and main transformer after installing inefficiency power compensation apparatus. 本文分析和计算了加装无功补偿装置后的高压供电线路和主变压器的节能效果。 4) Route 线路 1. Method of setting public transport routes; 公共交通线路布设方法研究 2. Research purposes: Through making analyses of the landform and geological conditions in the valley zone,the principle of route selection is decided for the purpose of providing basis for the route selection. 研究目的:通过对本段地形、地质条件的分析,确定线路方案的选线原则,从而为线路方案的选择和完善提供依据。 3. It will be significant in design of the tunnel route selection. 本文对指导隧道线路方案设计具有重要作用。 5) line 线路 1. Research on the railway line trend in Mongolia; 蒙古国铁路线路走向方案研究 2. Influence of zero-sequence mutual inductance of the same pole parallel laying line on zero-sequence current protection; 同杆并架线路零序互感对零序电流保护的影响 6) transmission line 线路 1. Research on preventing icing flashover on transmission line insulators; 输电线路绝缘子冰闪防治措施的研究 2. Study on least approaching distances between ±800 kV DC transmission line and 1 000 kV AC transmission line in a hybrid corridor; ±800kV直流和1000kV交流线路同走廊时的最小接近距离研究 3. Utilization and study of transmission line protection communication channel in South Hebei electric power network; 河北南网线路保护通道的使用与研究参考词条传输线路屏蔽线路输电线路高压线路超细线路线路压降电缆线路微细线路管线路由线路说明原子与Core 专项分析补充资料：ANSYS SOLID65环向布置钢筋的例子 ANSYS SOLID65环向布置钢筋的例子 ! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1% ! 作者: 陆新征清华大学土木系 ! FINISH /CLEAR /PREP7 !* ! 单元属性 ET,1,SOLID65 !* KEYOPT,1,1,0 KEYOPT,1,5,0 KEYOPT,1,6,0 KEYOPT,1,7,1 !* !实参数1：不同方向配筋 R,1,2,.001, , ,2, .01, RMORE, 90, ,2,.005 ,90 ,90 , !材料属性 !混凝土基本材料属性 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,EX,1,,30E2 MPDATA,PRXY,1,,.2 !屈服准则 TB,MISO,1,1,5, TBTEMP,0 TBPT,,0.0005,15 TBPT,,0.001,21 TBPT,,0.0015,24 TBPT,,0.002,27 TBPT,,0.003,24 !破坏准则 TB,CONC,1,1,9, TBTEMP,0 TBDATA,,.5,.9,3,30,, TBDATA,,,,1,,, MPTEMP,,,,,,,, MPTEMP,1,0 !钢材基本属性 MPDATA,EX,2,,200E3 MPDATA,PRXY,2,,.27 !屈服准则 TB,BISO,2,1,2, TBTEMP,0 TBDATA,,310,2E3,,,, ! 管道内径和外径 CYL4,0,0,3000, , , ,10000 CYL4,0,0,2000, , , ,10000 VSBV, 1, 2 ! 定义局部柱坐标 CSWPLA,11,1,1,1, KWPAVE, 11 WPRO,,-90.000000, VSBW, 3 WPCSYS,-1,0 KWPAVE, 1 WPRO,,,-90.000000 VSBW,ALL ESIZE,500,0, ! 注意：设定单元局部坐标 VATT, 1, 1, 1, 11 !* VSWEEP,ALL /DEVICE,VECTOR,1 /ESHAPE,1.0 /REPLO ! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com