1) gate groove stress
门槽应力
1.
And the gate groove stress of flat sluice is enphasizde .
计算中考虑闸室结构的整体作用,着重研究了平面闸门槽应力,并将其计算结果与工程设计中的几种常用方法进行对比,得出了一些有价值的结论。
3) threshold stress
门槛应力
1.
During dynamically charging four kinds of C90 tubular steels with hydrogen,the concentration of divisible hydrogen c0 is directly proportional to cathodic current i, and thenormalized threshold stress σc.
四种高强度油并管钢动态充氢时，进入试样的可扩散氢含量c0和充氢电流i成正比；而氢致断裂门槛应力σc与名义屈服强度σt之比和Inc0成正比，即σc／σt=A-BInc0。
2.
The threshold stress decreased linearly with the logarithm of hydrogen concentration for the samples in constant load tests.
用电化学和恒载荷拉伸试验方法,测定了不同充氢电流下氢在X80管线钢中的扩散系数、试样中可扩散氢浓度以及管线钢氢致断裂门槛应力。
3.
Hydrogen permeation coefficient and diffusible hydrogen content in drill pipe steel S135 during cathodic charging with hydrogen were studied by an electrochemical method,and the hydrogen induced cracking(HIC) threshold stress of the steel was investigated using constant load tests.
通过电化学渗氢技术与恒载荷拉伸试验方法,研究了不同充氢电流密度下S135钻杆用钢的氢扩散系数、试样中的可扩散氢浓度及其氢致开裂门槛应力。
4) stress-relief groove
应力减轻槽
1.
Take pin threads of NC50 drill collar as an example,Finite Element Method is used to analyze the different stress-relief grooves of pin thread connection.
以NC50型钻铤公螺纹作为研究对象,用有限元方法对加工有不同应力减轻槽的钻铤公螺纹接头进行了分析计算。
5) stress relief groove
应力释放槽
1.
The upset transition area of the drill pipe with stress relief groove was analyzed mechanically and systematically.
联合使用I-DEAS和MARC两个分析软件,采用三维有限元技术对在拉伸、弯曲复合载荷作用下的带应力释放槽钻杆的加厚过渡区进行系统力学分析,研究了应力释放槽对钻杆加厚过渡区应力集中的影响。
6) stress-relief grooves
应力分散槽
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条