1) ultra thin metallic film
极薄金属膜
1.
This paper reports the infrared reflection spectra of multilayer films containing ultra thin metallic films.
分析了含极薄金属膜的多层膜的红外反射谱，给出了一般的分析方法，包括：极薄金属膜的光学常数与膜厚的关系；岛状薄膜的光学常数与几何尺寸的关系；并进一步分析了多层膜中的表面电磁振动模及其对反射谱的影响。
2) metallic film
金属薄膜
1.
The adhesion property of Au/NiCr/Ta multi-layered metallic films was investigated by the indentation method,rolling contact fatigue method and scratch method with both friction and acoustic emission modes.
针对Al2O3基体上磁控溅射沉积的Au/NiCr/Ta多层金属薄膜,用压痕法、滚动接触疲劳法、摩擦力和声发射两种模式同时监测的划痕法,对比研究了金属薄膜与基体的结合性能。
2.
Au/NiCr/Ta and Au/NiCr metallic multilayers were deposited on A1203 substrate by magnetron sputtering and their critical load (La) was studied by scratch method with friction and acoustic emission mode, moreover, the scratch curve and morphology of metallic films were compared with TiN film.
采用摩擦力和声发射两种模式同时监测的划痕法研究了 Ａｕ／ＮｉＣｒ／Ｔａ和 Ａｎ／ＮｉＣｒ多层金属薄膜的临界载荷 Ｌｃ，并与ＴｉＮ硬质薄膜进行了对比。
3.
The relationship between resistivity of metallic film and its surface roughness, residual stress was investigated according to experimental results.
针对磁控溅射Au金属薄膜,从实验角度研究了该薄膜电阻率与表面粗糙度、残余应力的关系,并对结果进行了分析。
3) metal film
金属薄膜
1.
A unified model for 1/f noise and 1/f~2 noise due to electromigration in metal film;
金属薄膜电迁移1/f噪声与1/f~2噪声统一模型
2.
Application of metal film thermal resistor to pressure sensor;
金属薄膜式热敏电阻器在压力传感器中的应用
3.
A group of experiments of metal film preparation and physical property measurement;
金属薄膜制备及物性测量系列实验
4) metal thin film
金属薄膜
1.
Mechanical properties of metal thin film characterized by trilayer microbridge testings;
三层微桥法测量金属薄膜力学性能的研究
2.
Based on the hyperbolic two-step thermal conduction model,the two dimensional thermo-mechanical coupling of metal thin film under short pulse laser heating is investigated with finite element method.
从电子-声子相互作用的双曲型两步热传导模型出发,考虑到金属体内晶格对热传导的影响,采用有限元法,直接在时间域中求解了金属薄膜内受短脉冲激光加热的二维热机耦合问题,避免了以往因电子-声子能量方程之间的耦合关系给二维热响应问题解析求解带来的困难,提高了用数值反变换工作时计算的精度,减少了工作量,得到了金属薄膜内二维热机耦合问题的温度、位移和应力的变化规律。
5) metallic films
金属薄膜
1.
Relationship between plating and magnetron sputtering for metallic films;
化学镀金属薄膜与磁控溅射的关联性
2.
Several methods to improve the linearity of anisotropic magnetoresistance (AMR) sensors were suggested based on the analysis of the generation of nonlinearity in magnetoresistive sensors of metallic films.
在分析金属薄膜磁电阻传感器非线性产生原因的基础上,提出了几种设计AMR(各向异性磁电阻)薄膜磁电阻传感器时改善其线性度的方法。
3.
Applying Green s function approach and the hobo formula,we have calculated the conductivities of metallic wires and metallic films,these formulas are foundto associate with size of metal,and possess the quantum size effects.
运用量子统计的格林函数方法和久保公式分别计算一维金属线、二维金属薄膜的杂质散射电导率，计算结果表明，小尺寸金属系统的电导率眼金属系统的尺寸大小有关，具有量子尺寸效应。
6) Metal thin films
金属薄膜
1.
A brief introduction is given of new studies on quantum well effect to explain the exchange coupling in metal thin films, in which the moving behavior of electrons in quantum wells is analogous to the vibration of a classical string.
通过对电子在量子阱中的运动行为与经典的弦振动的类比，形象地介绍了金属薄膜中磁性交换耦合的量子阱效应机制研究新进展。
补充资料：双极离子交换膜
分子式：
CAS号：
性质：又称阴阳复合型离子交换膜(anion-cation composite membrane),复合离子交换膜。是特性离子交换膜的一种。这种膜的一面为阳离子膜结构层,另一面为阴离子膜结构层。一般采用阴膜与阳膜经热压加工而成。在直流电场下,阴、阳层结合处的水分子解离为OH-离子及H+离子。利用双极膜的这一特性,可进行中性盐的分解制取酸、碱,如从硫酸钠Na2S04制取H2SO4及NaOH,并可用于无机、有机化工产品的分离、重组和精制等方面。
CAS号：
性质：又称阴阳复合型离子交换膜(anion-cation composite membrane),复合离子交换膜。是特性离子交换膜的一种。这种膜的一面为阳离子膜结构层,另一面为阴离子膜结构层。一般采用阴膜与阳膜经热压加工而成。在直流电场下,阴、阳层结合处的水分子解离为OH-离子及H+离子。利用双极膜的这一特性,可进行中性盐的分解制取酸、碱,如从硫酸钠Na2S04制取H2SO4及NaOH,并可用于无机、有机化工产品的分离、重组和精制等方面。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条