负载试验台,load test stand,在线英语词典,英文翻译,专业英语

1) load test stand

负载试验台

Modification of an auxiliary motor load test stand;

辅助电机负载试验台的改进

2) rolling load test bench

滚动负载试验台

Presented are the functions, main technical parameters and constituent components of the AC drive test system forlocomotive, composed of locomotive power supply, converter, 3-axial bogie rolling load test bench, asynchronous traction motor testbench and microprocessor automatic control system.

介绍了集机车供电、变流器、三轴转向架滚动负载试验台、异步牵引电动机试验台、微机自动控制于一体的机车交流传动试验系统的功能、主要技术参数以及主要设备。

3) loaded servo test-bed

伺服负载试验台

The object which this project would research was a high performance loaded servo test-bed.

从控制难度和设计成本的角度考虑,直接对实际伺服系统进行研制和调试不太合适,故有必要研制一套伺服负载试验台来模拟实际伺服系统的功能。

4) immobilization

负载

Advances in studies on the kinetics and technology of immobilization of TiO_2 photocatalyst film;

TiO_2光催化膜负载机理和技术研究进展

Study on immobilization technology of nanosized titanium dioxide photocatalyst;

纳米TiO_2光催化剂负载技术研究

Study of Modification with Doping and Immobilization of Nanometer Titanium Dioxide Photocatalyst;

纳米TiO_2光催化剂掺杂改性与负载的研究

5) supported

负载

Preparation and Characterization of Ni Catalysts Supported on Organized Mesoporous Alumina;

负载Ni金属有序介孔氧化铝催化剂的制备及表征

Catalytic synthesis of benzyl acetate by supported heteropolyacid PW_(12)/C;

活性炭负载磷钨酸催化合成乙酸苄酯

Research of diatomite-supported iron-based late transition metal catalyst;

焙烧温度和盐酸浓度对硅藻土负载铁系后过渡金属催化剂的影响

6) load

负载

Study on Adsorption of Formaldehyde using Bamboo Charcoal loaded with TiO_2;

竹炭负载二氧化钛吸附甲醛的研究

Preconcentration using diatomite loaded with 1-(2-pyridylazo)-2-naphthol and determination of cadmium in water samples by flame atomic absorption spectrometry;

硅藻土负载1-(2-吡啶偶氮)-2-萘酚富集-原子吸收光谱法测定水中镉

Humidity sensitive property of polyaniline nanotubes loaded with LiCl by self-assembly;

负载LiCl的自组装聚苯胺纳米管的湿敏性质研究

参考词条

非负载负载敏感负载电流负载钛负载辊缝 ZrO2负载量负载转矩热负载时变负载负载化 ε_0 翻译纲要

补充资料：K9225水压试验台操作规程

1、遵守铸设备通用操作规程。
2、检查所有的密封堵塞件是否完好，如有损坏，应于更换。
3、逐个操纵各伐门手柄进行试车，检查管路系统是否有漏气漏水现象，确认一切正常后，方可进行生产。
4、在吊运缸体过程中，不要碰撞设备，注意人身安全。
5、工作以后，缸体要吊离设备，不要停放在试验台上。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引负载特性负载率负载顺序负载纤维 Au负载负载扰动

1) load test stand 负载试验台 1. Modification of an auxiliary motor load test stand; 辅助电机负载试验台的改进 2) rolling load test bench 滚动负载试验台 1. Presented are the functions, main technical parameters and constituent components of the AC drive test system forlocomotive, composed of locomotive power supply, converter, 3-axial bogie rolling load test bench, asynchronous traction motor testbench and microprocessor automatic control system. 介绍了集机车供电、变流器、三轴转向架滚动负载试验台、异步牵引电动机试验台、微机自动控制于一体的机车交流传动试验系统的功能、主要技术参数以及主要设备。 3) loaded servo test-bed 伺服负载试验台 1. The object which this project would research was a high performance loaded servo test-bed. 从控制难度和设计成本的角度考虑,直接对实际伺服系统进行研制和调试不太合适,故有必要研制一套伺服负载试验台来模拟实际伺服系统的功能。 4) immobilization 负载 1. Advances in studies on the kinetics and technology of immobilization of TiO_2 photocatalyst film; TiO_2光催化膜负载机理和技术研究进展 2. Study on immobilization technology of nanosized titanium dioxide photocatalyst; 纳米TiO_2光催化剂负载技术研究 3. Study of Modification with Doping and Immobilization of Nanometer Titanium Dioxide Photocatalyst; 纳米TiO_2光催化剂掺杂改性与负载的研究 5) supported 负载 1. Preparation and Characterization of Ni Catalysts Supported on Organized Mesoporous Alumina; 负载Ni金属有序介孔氧化铝催化剂的制备及表征 2. Catalytic synthesis of benzyl acetate by supported heteropolyacid PW_(12)/C; 活性炭负载磷钨酸催化合成乙酸苄酯 3. Research of diatomite-supported iron-based late transition metal catalyst; 焙烧温度和盐酸浓度对硅藻土负载铁系后过渡金属催化剂的影响 6) load 负载 1. Study on Adsorption of Formaldehyde using Bamboo Charcoal loaded with TiO_2; 竹炭负载二氧化钛吸附甲醛的研究 2. Preconcentration using diatomite loaded with 1-(2-pyridylazo)-2-naphthol and determination of cadmium in water samples by flame atomic absorption spectrometry; 硅藻土负载1-(2-吡啶偶氮)-2-萘酚富集-原子吸收光谱法测定水中镉 3. Humidity sensitive property of polyaniline nanotubes loaded with LiCl by self-assembly; 负载LiCl的自组装聚苯胺纳米管的湿敏性质研究参考词条非负载负载敏感负载电流负载钛负载辊缝 ZrO2负载量负载转矩热负载时变负载负载化 ε_0 翻译纲要补充资料：K9225水压试验台操作规程 1、遵守铸设备通用操作规程。 2、检查所有的密封堵塞件是否完好，如有损坏，应于更换。 3、逐个操纵各伐门手柄进行试车，检查管路系统是否有漏气漏水现象，确认一切正常后，方可进行生产。 4、在吊运缸体过程中，不要碰撞设备，注意人身安全。 5、工作以后，缸体要吊离设备，不要停放在试验台上。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com