1) seepage spot
渗漏点
1.
Results and experience of using the said method to search for the seepage spots of swimming pool and dam are presented.
介绍了该方法在寻找游泳池和水坝渗漏点位置时的应用效果和经验。
2) checking and blocking up crocks spot
查、堵渗漏点
3) roof leak point
屋面渗漏点
1.
According to years of experience,the paper analyzes the reasons of roof leakage by three aspects including construction team,building material and roof leak points,and proposals on the prophylactico-therapeutic measures are put foruard.
文章通过施工队伍、材料、屋面渗漏点三个因素对建筑屋面防水渗漏进行分析,并在此基础上提出了相应的防治措施。
4) leakage
[英]['li:kɪdʒ] [美]['likɪdʒ]
渗漏
1.
Seal leakage treatment of homemade melt filter in PTA plant;
聚酯装置国产熔体过滤器密封渗漏处理
2.
Principles and protective measure of corrosion leakage of chlorethylene synthesis convertor;
氯乙烯合成转化器腐蚀渗漏机理及防护措施
3.
Foundry-Techniques for Preventing Leakage of Aluminum Alloy Shock Absorber Cylinders;
防止铝合金减震器简体渗漏的铸造工艺措施
5) Seepage
[英]['si:pɪdʒ] [美]['sipɪdʒ]
渗漏
1.
Cause Analysis for Seepage of Auto-Cylinder Head of AC4D Casting Alloy;
AC4D铸铝合金气缸盖渗漏故障成因分析
2.
Causes analysis of the abjunction of the tube bundles and the seepage of the weld seam of the autoclave;
压煮器管束脱落与焊缝渗漏的原因分析
3.
How to Deal with the Seepage from Oil Tank;
成品油金属储罐渗漏的修复方法
6) leaching
[英][li:tʃ] [美][litʃ]
渗漏
1.
Study on the nitrogen leaching in the paddy-wheat rotation agroecosystem;
稻麦轮作农田系统中氮素渗漏流失的研究
2.
Nitrogen loss via runoff and leaching from soil as a function of types of urea applied in wheat season.;
麦季施用不同尿素的氮排水和渗漏损失
3.
GLEAMS model was introduced to calculation of nitrate leaching in an agricultural small catchment in Southeast China.
应用GLEAMS模型估算我国东南亚热带地区农业小流域硝态氮的渗漏淋失。
补充资料:闭式单点、双点压力机
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
(一)加工精度 | 参照GB10924-89、GB10933-89、JB5200-91 | ||||||
1、滑块下平面对工作台上平面的平行度(mm) | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.02+0.10/100×滑块下平面的被测长度 | |||||||
2、滑块行程对工作台上平面的垂直度 | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.05+0.02/100×滑块行程长度 | |||||||
(二)结构性能 | |||||||
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50% | 大于规定值10% | 大于规定值 | 达到规定值 | 达不到规定值 | |||
2、液压超负荷保险装置、微调装置、吨位指示器 | 全部具有 | 全部具有 | 部分具有 | 没有 | |||
(三)噪声dB(A) | |||||||
1、公称力≤400kN | ≤85 | ≤87 | ≤88 | >88 | |||
2、公称力>400kN | ≤87 | ≤88 | ≤90 | >90 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条