1) Smoke generation
发烟等级
2) fuming,smoking
发烟
3) Fuming nitric acid
发烟硝酸
1.
15),n(p-toluidine)∶n(fuming nitric acid)=1∶2.
用发烟硝酸硝化,加入二氯乙烷作溶剂,溶剂可回收利用。
4) oleum
发烟硫酸
1.
Production and storage of high-grade oleum;
高浓度发烟硫酸的生产与储存
2.
The operation conditions include oleum.
工况也包括了发烟硫酸。
3.
A process of producing a - alkenyl sulfonates (AOS) by sulfonating wax cracking a - olefin (AO) with oleum was introduced.
以兰州石油化工公司石蜡裂解α-烯烃(AO)为原料,以发烟硫酸为磺化剂,制备了α-烯基磺酸盐(AOS)。
5) smoke composition
发烟剂
1.
For improving the attenuation property of smoke formed by anti-IR-MMW(Anti-infrared-millimeter) compound smoke composition,on the basis of the prepared smoke composition,the effects of expansible graphite of differently inserted substances on the smoke attenuation property at 3~5 μm,8~14 μm,3 mm and 8 mm are studied experimentally.
为提高抗红外-毫米波双模发烟剂烟幕的衰减性能,以已研制出的发烟剂为基础,实验研究了不同插层物质的可膨胀石墨对所成烟幕3~5μm、8~14μm及3 mm8、mm波衰减性能的影响,并从插层物质热分解及氧化能力和膨胀石墨结构等方面对结果进行了分析。
2.
The results show that the exothermic peak of the smoke composition with nano Fe_3O _4 accelerate 28 ℃ compared to that of smoke composition with micro TiO_2,wh ereas its burning rate a.
采用化学共沉淀法制备了纳米Fe3O4粒子,以微米Fe3O4、微米TiO2、纳米TiO2/Fe3O4及纳米Fe3O4为氧化剂配制了不同的发烟剂。
3.
Uniform design method which can reduce experiment quantity is used in the formula design of infrared smoke composition.
将均匀设计方法应用于红外发烟剂配方的优化试验研究,减少了试验工作量,优选出的红外发烟剂形成的烟幕,对8~14μm波段的红外辐射衰减率达96。
6) Smoke agent
发烟剂
1.
The application techniques of the composites and the mass ratio of phosphorusbased smoke agent(HG94) to infrared interfering smoke agent(FY) in the composites were studied,and the smoke screen performances were tested.
研究了复合干扰发烟剂中HG94磷基发烟剂和FY红外干扰发烟剂的配比和使用技术,并测试了烟幕性能。
2.
The study on the formulation and the influence factors to the property of copper-base IR interfering smoke agent as well as measurement results of the property are described.
对铜基红外干扰发烟剂的配方及影响配方性能的主要因素进行了实验研究,并对其性能进行了测试。
3.
According to the limitation and principle of HC smoke,a series of prescription of anti infrared smoke agents were determined by a lot of experiments,such as replacing zinc with magnesium,replacing zinc oxide with manganese oxide,adding red phosphorus and other organic compounds containing rich carbon.
分析了传统HC烟幕对可见光和红外的遮蔽特性,针对HC发烟剂配方的局限性和发烟原理,通过用镁粉代替锌粉,用氧化锰代替氧化锌,添加红磷和富碳有机化合物等途径并结合大量实验确定了系列抗红外发烟剂配方。
参考词条
补充资料:陵墓等级也森严-商周陵墓的“羡道”等级
陵墓等级也森严-商周陵墓的“羡道”等级
古代统治阶级厚葬成风,在坟墓上糜费大量人力和物资。帝王一级称“山陵”,是从秦汉开始的词。一般说,陵墓分为地下和地上两部分。地下,主要是安置棺柩的墓室;开始(约从商代到汉)用木椁室,随后出现砖石结构墓室,东汉以后成为主流。这种地下砖石构筑物,发展到后来,规模宏大,结构严密,真正成为“地下宫殿”。还有一类墓室,由天然山岩中开凿而成;开凿岩墓始见于汉代,但是用于陵墓一级则主要是唐代。我国早期砖石结构资料,多数来自古代墓葬,表现古代对砖石结构在力学和材料施工技术方面达到的水平;古代墓葬,又包括防水、排水、密封等技术方法的历史资料;古代墓葬的地下结构物较地面建筑保存为多,其中包含大量古代建筑的形象和雕刻、绘画艺术等多方面资料;
地面部分,主要是环绕陵体而形成的一套布置,其作用则是给人以严肃、纪念的气氛,是为影响后人而设的。从地形选择到入口、神道、祭祀场所、陵体,从建筑到绿化,长期积累了不少经验,创作了纪念性建筑群和严肃静穆环境。但是,地面部分比较容易受到破坏,最早的资料只及于商代,而且残缺不全;
商周陵墓,地下以木椁室为主,其东、南、西、北四向有斜坡道由地面通至椁室,称“羡道”,天子级用四出“羡道”,诸侯只可用两出(南北两向)。椁室、羡道及墓葬附近则殉葬大量车、马、器物、祭器以至奴隶。有些商代陵墓,地面不起坟,而在墓上建造祭祀性建筑。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。